Mitsubishi GX50A Operator's Manual page 21

Main Shift Lever
The main shift lever is used to shift the
transmission gear into any four speed
transmissions. Combined with the sub shift
lever, the gear transmissions can be changed in
sixteen speeds.
Main Shift
Sub Shift Lever Sub Shift Lever
Sub Shift Lever
There are four speed transmissions of H (high-
speed), M (medium-speed), L (low-speed), and
SL (super low-speed) for the sub shift lever.
NOTE
- Refer to the speed table attached to the
fender (left) for the speed at each position of
the main shift lever and sub shift lever.
(Refer to page 31 for operation speed and
PTO speed.)
Sub Shift
MN00008_A
Main Shift Lever Main Shift Lever
MN00009_A
FUNCTIONS OF EACH PART
Shuttle Shift Lever
WARNING
- When shift to reverse, reduce engine
speed and confirm the safety in back.
The shuttle shift lever can be shifted back and
force.
F: Forward
R: Reverse
Shuttle Shift Lever Shuttle Shift Lever
Rear PTO Shift Lever
Rear PTO shift lever is used to change the
revolution speed of rear PTO shaft in three steps.
(Refer to page 31.)
NOTE
- Lift the attachment (such as a rotary) and
step on the clutch pedal to stop the rear PTO
revolution before operating the rear PTO
shift lever. When it is difficult to engage, do
not operate forcibly and step on the clutch
pedal again to operate it.
9
For injury accident prevention
MN00010_A
Rear PTO Shift Lever Rear PTO Shift Lever
MN00010_A