Mitsubishi GX50A Operator's Manual page 22

FUNCTIONS OF EACH PART
Clutch Pedal
The clutch must be disengaged by depress the
clutch pedal when starting the engine, stopping
the tractor, storing the tractor and operating the
shift levers.
Clutch Pedal Clutch Pedal
NOTE
- When operate the clutch pedal, keep fast
depress and slow release.
- The engine can not start without clutch
pedal depress because of start safety
switch.
Brake Pedals
- When traveling, entering or leaving a
The brake pedals are provided individually in left
and right sides. When the brake pedals are
unlocked, press the left pedal to stop the left
rear wheel and the right pedal to stop the right
rear wheel.
MN00012_A
When both brake pedals are locked together
with a clip, the brake is applied on the both rear
wheel by pressing the brake pedal.
[Brake Locked] [Brake Locked]
[Brake Unlocked] [Brake unlocked]
NOTE
- Release both the clutch pedal and the brake
pedal when operating the tractor. Operation
with the pedals pressed may cause damage.
- When stopping the tractor, step on the
clutch pedal along the brake pedal.
10
WARNING
For injury accident prevention
farm field, crossing a dike, using a step,
working on slope, and equipped with a
front-loader, lock the brake pedals of
left and right together using a clip.
Brake only on one side may not be
sufficient to prevent an overturn,
collision, or tumbling down.
Brake Pedal (Left)
Brake Pedal (Right)
Clip
MN00013_A