Mitsubishi GX50A Operator's Manual page 25

Side Cover
(1) Open the hood and fix it.
(2) Press the button in front of the side cover and
pull the side cover outward. (The following
procedures are the same for both sides.)
Button Button
(3) Once the side cover comes off of the button,
lift the front of the side cover and remove the
side cover hole from the front fulcrum pin.
Front Fulcrum Pin Front Fulcrum Pin
(4) Slide the side cover as pulling it frontward,
remove the fast pin located in the rear of the side
cover from the hole, and remove the side cover.
Holes Holes
NOTE
- Perform the removal procedure in the
reverse order to mount the side cover.
In order of (4), (3), (2), to (1)
Side Cover Side Cover
MN00018_A
Side Cover Hole Side Cover Hole
MN00019_A
Side Cover Side Cover
Fast Pins Fast Pins
MN00020_A
13
FUNCTIONS OF EACH PART
Hood
Pull the grip down and unlock the hood.
Side Cover (Right) Side Cover (Right)
"Pull down." "Pull down."
Lift the hood and fix with a lock bar.
Lock Bar Lock Bar
Grip Grip
MN00021_A
MN00022_A
Hood Hood
MN00023_A