Mitsubishi GX50A Operator's Manual page 23

Parking Brake Lever
WARNING
For injury accident prevention
- When parking or stopping the tractor,
lock the brake pedals on the both left
and right sides to apply the parking
brake lever.
Lock the brake pedals of left and right sides and
step on the brake pedal as pushing the parking
brake lever down to apply the parking brake.
When releasing the parking brake, step on the
brake pedal completely.
Low-Speed Low-Speed
Engine Speed Control Lever
(Throttle Lever)
Pull the lever frontward to set to <
Speed) and push forward to set to <
Speed).
Accelerator Pedal
Press the pedal to accelerate and release to
decelerate. At this time, keep the engine speed
control lever in low-speed.
Engine Speed
Control Lever
High-Speed High-Speed
Parking Brake Lever Parking Brake Lever
Accelerator Pedal Accelerator Pedal
MN00014_A
> (High-
> (Low-
Low Speed
High Speed
MN00125_A
FUNCTIONS OF EACH PART
MFD Control Lever
Move the MFD control lever upward to engage
the front drive.
The performance of MFD is optimum for the
following cases.
(1) When traction force is required for works on
such as slope or ill-drained paddy field and
with trailer, front loader, or plow
(2) When working in sandy area
(3) When preventing the tractor from running out
at working of rotary tillage in hard soil field
(4) When entering the hard soil field, crossing a
ridge, or unloading to a vehicle
NOTE
- The clutch pedal must be pushed down to
operate the MFD lever.
- When driving a tractor solely on a flat road,
set the MFD control lever to <OFF> to
prevent the tires from wearing.
- When operating the MFD control lever, set
the front tires in straight.
11
MFD Control Lever MFD Control Lever
MN00015_A