WORKING PROCEDURE
2. Implements
Handle the implement following the below listed
items.
WARNING
For injury accident prevention
- Attach or remove the implement on flat
place according to the instruction
manual.
- Before attaching, removing, or
adjusting the implement, apply parking
brake, stop the engine, and set the rear
PTO shift lever to the "<N> (Neutral)".
- When moving the tractor to attach the
implement, keep the clearance of the
tractor and implement clear of
personnel.
- When connecting or attaching a heavy
implement, place a balance weight to
the tractor to maintain the balance.
- Do not operate the attachment for low
speed revolution at high speed
revolution. Observe the specified rear
PTO revolution speed.
- Take a wider tread for works such as
towing or on slope.
- When an implement is attached, the
length becomes longer. Be very careful
and secure the safety when turning.
- When running on roads and streets,
remove the implement and transport in
other vehicle.
- Do not tow a trailer whose maximum
total loading capacity exceeds 1.5 times
of the weight of the tractor. The brake
cannot be applied appropriately, and it
may cause an accident.
34