General Information; Description - optris CT Operator's Manual

-
8

1 General Information

1.1 Description

Thank you for choosing the optris® CT infrared thermometer.
The sensors of the optris CT series are noncontact infrared temperature sensors.
They calculate the surface temperature based on the emitted infrared energy of objects [►9 Basics of
Infrared Thermometry]. The sensor housing of the CT head is made of stainless steel (IP65/ NEMA-4
rating) – the sensor electronics is placed in a separate box made of die casting zinc.
The CT sensing head is a sensitive optical system. Please use only the thread for mechanical
installation.
•
•
•
Read the manual carefully before the initial start-up. The producer reserves the right to change
the herein described specifications in case of technical advance of the product.
► All accessories can be ordered according to the referred part numbers in brackets [ ].
1.800.561.8187
Avoid abrupt changes of the ambient temperature.
Avoid mechanical violence on the head – this may destroy the system (expiry of warranty).
If you have any problems or questions, please contact our service department.
www.
information@itm.com
.com
-