Table of Contents
Advertisement
Shark Spot Two
Control Panel
●
Use the MENU button to open the main menu or to exit the current submenu and return to the main
menu.
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.
Start-up
Upon start-up the display shows a splash screen with the Showtec logo.
Afterwards the display shows the start screen. The start screen provides information about the
temperature of the LEDs, the DMX starting address of the device, and the selected DMX channel mode:
Press the ENTER button or the UP/DOWN buttons to enter the main menu.
Note:
If no button is pressed, after 25 seconds of inactivity the display will turn off. Press any button to turn the
display on.
Product code: 45030
A) LED DISPLAY
B)
ENTER button
C) DOWN button
D) UP button
E)
MENU button
Fig. 14
20
Advertisement
Table of Contents
