Table of Contents
Advertisement
Shark Spot Two
Settings
In this menu you can set the Shark's settings.
01) Press the UP/DOWN buttons to select the desired submenu. The display will show:
02) Press the ENTER button to enter the desired submenu.
03) The submenus are:
Pan Rev: Pan reverse. Press the UP/DOWN buttons to choose between NO/YES.
Tilt Rev: Tilt reverse. Press the UP/DOWN buttons to choose between NO/YES.
Display Rev: Display reverse. Press the UP/DOWN buttons to choose between NO/YES.
Sensitivity: Sound sensitivity. Press the UP/DOWN buttons to set between 001–100, from OFF to
high sound sensitivity.
DMX Fail: To adjust the behaviour of the device in case of a DMX signal error. Press the UP/DOWN
buttons to choose between OFF and Hold. Choose OFF and the device will blackout its output,
when a DMX signal error occurs. Choose Hold and the device will fall back on the last properly
working DMX signal from before the DMX signal error, which ensures undisrupted performance.
Calibration: See page 25 for more information.
Factory Reset: Restore default settings. Press the UP/DOWN buttons to choose between YES/NO.
Reset Motors: Reset the motors responsible for the movement of the moving head.
04) Once you have adjusted the settings, press the ENTER button to save changes.
Product code: 45030
24
Advertisement
Table of Contents
