Symbols And Signal Words; Symbols On The Information Label - SHOWTEC SharkSpot Two V1 User Manual

Table of Contents

Advertisement

Shark Spot Two
References:
0–255:
Notes:

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.
DANGER
WARNING
CAUTION
Attention
Important
Electrical hazard
Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with an information label. The information label is located on the mounting
bracket of the device.
The information label contains the following symbols:
This device shall not be treated as household waste.
This device is designed for indoor use.
This device falls under IEC protection class I.
Minimum distance from lighted objects.
Minimum distance from other objects.
Replace any cracked protective shield.
Caution: Risk of electric shock. Do not open.
Caution: To reduce the risk of electrical shock, do not remove cover. No user-
serviceable parts inside. Refer servicing to qualified personnel.
Product code: 45030
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "turn the adjustment handle (05)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Indicates important information for the correct operation and use of the
product.
Read and observe the instructions in this document.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

45030

Table of Contents