Calibration; System Info - SHOWTEC SharkSpot Two V1 User Manual

Shark Spot Two

Calibration

In this menu you can set the initial movement and color parameters of the Shark.
01) Once you have chosen CALIBRATION (see page 25) press the ENTER button to open the menu.
02) You will now need to insert the password, in order to access the menu. Press the UP/DOWN buttons
until the display shows 018 and press the ENTER button to confirm. The display will show:
03) The submenus are:
 All To Origin: Restore default calibration settings.
 Pan: Set the initial pan position.
 Tilt: Set the initial tilt position.
Color: Set the initial color position.

 Gobo: Set the initial gobo position.
 Focus: Set the initial focus position.
 Prism Start: Set the initial prism start position.
 Prism End: Set the initial prism end position.
04) Once you have chosen the option which you would like to adjust, press the ENTER button to open
the menu. The adjustment ranges are from 001–255.
05) Press the UP/DOWN buttons to adjust settings and press the ENTER button to save changes.

System Info

In this menu you can view the status of the Shark.
01) Press the ENTER button to open the menu. The display will show:
02) It is now possible to view the current software version, currently active operation mode and the DMX
starting address.
Product code: 45030
25