Spare Parts; Non-Original Spare Parts; Characteristics Of The Original Blades - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220

2.2.1 Non-original spare parts

Use original spare parts only. Replacement of any machine component with anything other than
a part authorised by the Manufacturer can adversely affect performance, working life or safety of
this machine and will void the Warranty.
The manufacturer disclaims all liability for any claims or damages, albeit under warranty, property
damage, personal injury or death resulting from the use of unauthorised spare parts.

2.2.2 Characteristics of the original blades

The original blades have design, material and processing characteristics optimised for use on
the equipment for which they were designed; these characteristics are not present in so-called
"compatible" spare parts.
The table emphasises the reasons why it is important to choose an original blade, useful when
making such decisions.
Requirement
No breakage of the blade
ends.
No breakage of the
blades.
Excellent balance.
Minimum noise.
Minimum vibrations.
Excellent cutting result.
2 - INFORMATION FOR SERVICE CENTRES

2.2 SPARE PARTS

Using steel balls, the manufacturer simulates what can happen
when mowing over any foreign bodies on the lawn. This can ruin
the blade edge, but no component can come loose, fall off or be
hurled away.
The impact test is the most severe durability test that any lawnmow-
er can be subjected to.
An iron tube is placed exactly inside the blades when the mower is
running.
The blade may deform but it will never, under any circumstances,
fall off or break.
This test verifies that blades and other components meet the high
safety requirements.
The blades and blade ends supplied by the authorised dealer all
have exactly the same weight.
The blades and blade ends supplied by the authorised dealer are
all perfectly balanced.
This guarantees minimum noise and vibrations, for maximum ma-
chine operating life.
This also ensures that the machine complies with the noise and
vibration regulations.
The blades and blade ends supplied by the authorised dealer are
optimised for the application for which they are intended.
In short, this means that the blades are suitable for the shape of the
casing and to the number of revolutions to provide the best possible
cutting result.
CHAPTER
Remarks
EDITION PAGE
2018 12 /
84