Stiga e-PARK 220 Workshop Manual page 20

WORKSHOP MANUAL
e-PARK 220
3. Disengage the upper (10) and lower (11) tab
latches securing the compartment (9).
4. Remove the compartment (9), pushing it from
the inside out.
5. Unscrew the four upper screws (13), the two
side screws (14) and remove the housing (3).
When assembling the compartment (9),
make sure to insert correctly into their re-
spective slots the upper tab latches (10),
then the two side guides (12) and finally
complete the coupling with the two lower
tabs (11).
Complete the assembly by performing the
above steps backwards,
Reset all connectors and verify their proper
operation. [ 8.3.1]
CHAPTER
3 - CHASSIS AND COVERS
10
11
14
10
EDITION
2018
9
10
11
13
13
13
12
PAGE
20 /
84
9
13
3