Stiga e-PARK 220 Workshop Manual page 28

WORKSHOP MANUAL
e-PARK 220
When reassembling:
6. Check that the front and rear of the machine
are perfectly aligned, using the steering wheel
in the straight position.
7. Identify the central link (11) of the chain (10),
which can be recognised by a different colour,
and assemble the chain on the pinion (12) so
that it coincides with the marking (13) placed
on the pinion tooth.
NOTE With the wheels aligned
and the steering wheel straight,
the marking must be perfectly
centred in the driving direction ,
in relation to the axis of the ma-
chine.
8. Reassemble the two front pulleys (9) with the
cables inserted in their respective grooves
and secure them with the two spring rings (8).
9. Wind the two cables in the grooves of the two
rear pulleys, following these instructions:
– right branch = upper pulley = left register;
– left branch = lower pulley = right adjuster;
then fully tighten the screws (5).
5
4 - STEERING
13
12
6
7
CHAPTER
= =
10
12
9
EDITION PAGE
2018 28 /
84
= =
11
9
8