Stiga e-PARK 220 Workshop Manual page 50

WORKSHOP MANUAL
e-PARK 220
Situation / Ac-
Component
TRACTION Disconnected /
CONTROLLER CON- Check connector
NECTOR B (large terminals
squared connector
under the seat)
TRACTION Disconnected /
CONTROLLER Con- Check connector
nector A (large rectan- terminals
gular connector under
the seat)
ACCELERATOR Disconnected /
PEDAL SENSOR Check connector
terminals
KT Relay Connector dis-
connected, coil
open, contact
open
RELAY DELAYED Connector dis-
TEMPERATURE OR connected, coil
OPC RELAY or KM open, contact
RELAY open
CLUTCH RELAY Connector dis-
connected, coil
open, contact
open
BLADE RELAY Connector dis-
connected, coil
open, contact
open
KZTP COIL Disconnected /
Check connector
terminals
KS COIL Disconnected /
Check connector
terminals
Auxiliary contact KZTP Disconnected /
Check connector
terminals
Parking brake released Disconnected /
switch Check connector
terminals
Brake pedal switch Disconnected /
Check connector
terminals
8 - ELECTRICAL SYSTEM
Display Indications on
"SERVICE" Mode
tion
AC-0 ACE-0
232 0
8 38
8 38
8 38
252 38
0 0
0 0
CHAPTER
Display indications
on "OPERATOR"
mode
Notes
No Service BLADE
ERROR
No Service SEAT ICON
"0" "0" Pedal GENERAL
ERROR
appears
GENERAL
ERROR
appears
No Service SEAT ICON
No error re- No error reported
ported
No error re- No error reported
ported
GENERAL
ERROR
appears
KZTP OPEN GENERAL
ERROR
appears
KZTP OPEN GENERAL
when pedal is ERROR
released appears when
traction is attempted.
MANUAL (P) struck
BRAKE always through
active
BRAKE always The icon (P)
active remains active
even when the brake
pedal is released.
EDITION PAGE
2018 50 /
84
Effects on the
machine
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
The traction works,
the blade motor only
works by holding down
the OPC button
Traction works, the
blade motor does not
work even if the red
light on the OPC but-
ton is on
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; motor blade
does not work (clutch
works)
Traction does not
work; brake release le-
ver in correct position
Traction does not
work; brake release le-
ver in correct position