Stiga e-PARK 220 Workshop Manual page 25

WORKSHOP MANUAL
e-PARK 220
4. Pull out the rod (6) together with the display
(7)
5. Loosen the two screws (8) that fasten the dis-
play (7) to the protective cover (9).
6. Push the display (7)
slightly backwards,
disconnect the con-
nector (10) and then
the display can be re-
placed, together with
the cable (2) and the
connectors (3) and
(10).
IMPORTANT The following procedure must be
followed to ensure that the rod and the display
can be reassembled correctly
7. Carefully lay the cable (2) along the entire
length of the housing in the rod (6).
8. Make sure that the connector (3) remains in contact with the
rod terminal, as shown in the drawing.
9. Reassemble all removed parts following steps 1 to 4 back-
wards making sure to:
– Carefully pull the cable out of the rod, reconnect the con-
nector (3) and return it into the frame hole.
– Restore the clamp (1) so that the cable (2) does not remain
loose.
4 - STEERING
8
CHAPTER
6
9
8
7 7
2
EDITION PAGE
2018 25 /
84
7
10
3
6
3
2