Stiga e-PARK 220 Workshop Manual page 71

WORKSHOP MANUAL
e-PARK 220
d) VMS status
The operating statuses are displayed in the table's fields.
INFO
VSM STATE
VSM RELAY
LOG **
* Try restarting.
** The crossed out logo indicates that the system is not saving data. Turn off and restart the machine.
e) Machine and interconnections status
The lighting of the light indi-
cates the correct functioning
of the component.
INFO
BRAKE MANUAL
for push movement
KEY B KM
= BMS active
sion from the BMS
KEY KZTP
= VMS active
* The machine cannot be switched on with the socket inserted.
9 - ELECTRONIC MANAGEMENT - BATTERY
TRACTION
Management phases sequence of the AC-0
traction control unit:
0 = key in "OFF" position
1 = key in activation position
2 = key in "ON" position
3 ÷ 4 = Inactive
5 = Software Lock*
6 = Shut-down phase
7 = all off (not visible in the display)
Relay 1 =
Contact in parallel to
machine on
the ignition key
Numbering of the data log file in the "Black
Box
TRACTION
= Transmission unlocked and wheels free
INTERCONNECTIONS STATUS
SEAT
= Driving permis- = NC status of the
seat micro switch
KS - Contactor BMS
= Active contactor = Active contactor
CHAPTER
SCALE VALUES AND MEANING
Management phases sequence of the blade
movement control unit ACE-0:
0 ÷ 3 = starting and starting phases
4 = fully operational
5 ÷ 6 = Stop stages
7 = error message from ACE-0
9 = alarm
Relay 2 =
= Contacts closed,
Blades control unit
ACE-0
Recording steps sequence:
0 ÷ 3 = Writing startup steps
4 = writing
5 = Standby
6 ÷ 7 = closing steps of the recording ses-
sion
8 = Error due to memory card absence or
failure
9 = Not active
10 = Error due to inability to save data.
e
SCALE VALUES AND MEANING
BRAKE
COM
= Correct com-
munication between
charger and BMS
PP - Presence Plug
= Charging socket
plugged in*
EDITION
2018
d
BLADE
= Controller active
Off = Battery
charger < 5%
BLADE
= Parking brake pedal pressed
STATE
Battery status
= waiting for
charging socket to be
inserted
= drained
= charged
PAGE
71 /
84