Table Of Contents - Ametek LAND MILLWATCH User Manual

Millwatch / Silowatch
1 General Description
2 Installation Dos and Don'ts
3 Service Requirements
4 Diagram of Monitor
5 Connecting the Electrical Power Supply
5.1 Connecting the Autocal Unit*
Millwatch / Silowatch (CO single stream, including high-CO)
*
6 Probe Dimensions and Mounting Flange Details
6.1 Coal Mill Probe Abrasive Applications
6.2 Standard Probe Non Abrasive Applications
7 Recommended Installation for Probe
7.1 Recommendations for Installing the Instrument Air Supply and
Calibration Gas
7.2 Connecting the Probe
8 Installing the Antifreeze Line
8.1 Connecting the Antifreeze Line
9 Blowback Unit
9.1 Blowback unit with antifreeze line
9.2 Blowback unit with standard line
10 Connecting the Blowback Trigger
11 Input Connection to Trigger Standby
12 Electrical and Signal Connections
12.1 Summary of Connections
Millwatch / Silowatch (CO single stream, including High-CO)
12.2 Summary of Connections
Silowatch (CO & O
13 Digital Inputs and Outputs
14 Analogue Outputs
15 Description of the Control Panel
16 Warm Up Routine
Contents
single stream)
2
Single Stream
1
2
3
4
5
6
7
7
8
9
9
10
11
12
13
13
13
14
15
16
17
18
19
20
21
22