= 85DR / 85DRB
3-4.2 To Enable The Rear Line Out (For 4 Speakers)
After Installation Of Creative Sound Drivers, you should enable the
Rear Line Out connector for 4-channel speaker.
1. Click to "My computer" icon,
and then "Control Panel", and
then "System", and you will see
t h e " S y s t e m P r o p e r t i e s "
screen.
3. Click the "Creative sound
Blaster PCI128" selection,
then Click on the "Properties"
button.
Properties
5. Your Audio System can now support 4 speakers out. Insert second
pair of speakers to the Rear Line out jack to verify this function. (See the
following Section 3-4.3 for identifying the Rear Line out jack.)
2. Click the "Device Manager"
button.
4. When "Creative Sound Blaster
PCI128 Properties " Window
appears, please click the 3D
Audio button, and then select
"Quad Speakers".
Click the "OK" button.
Quad Speakers
46
OK