Mainboard Specifications; 1-1.1 Cpu Socket; 1-1.2 System Chipsets; 1-1.3 Memory - SOLTEK SL-85DR User Manual

Table of Contents

Advertisement

1-1 Mainboard Specifications

1-1.1 CPU Socket

CPU Socket 478B on board, supporting Intel
the 478-pin package for :
• 400 MHz System Bus
• Hyper-pipelined technology
• Advanced dynamic execution
• Advanced transfer cache

1-1.2 System Chipsets

North Bridge Intel 82845-D plus South Bridge Intel 82801BA to work
with Intel Pentium 4 Processor for managing and arbitrating operations
between all system interfaces

1-1.3 Memory

2 DDR DIMM 184-pin sockets on board for DDR 266 SDRAMs, at 64bit
data transfer rate:
• Supporting up to 2 GB DDR 266/200 SDRAMs
• Installation of mixed volumes of DDR SDRAM modules with or without
ECC supported (populating ECC and non-ECC simultaneously not
supported)

1-1.4 AMI BIOS 2.01A

• Supporting Plug & Play V1.0
• Flash Memory for easy upgrade
• Supporting BIOS writing protection and Year 2000 compliant
• AMI BIOS Setup supported (Please see Chapter 4 BIOS Setup)

1-1.5 Accelerated Graphics Port (AGP) Interface

AGP Controller is embedded in chip, supporting:
• 1.5V (4X) power mode, AGP voltage selectable in BIOS Setup
• 4X AD and SBA signalling, AGP pipelined split-transection long-
burst transfer up to 1GB/sec.
• AGP v2.0 compliant
Chapter 1 Specification
®
Pentium 4 processors in
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-85drb

Table of Contents