SOLTEK SL-85DR User Manual page 70

85DR / 85DRB
Primary/Second
Master/Slave IDE
Power Button Function This option specifies how the power button mounted
Restore on AC/Power
Resume On Ring An input signal on the serial Ring Indicator (RI) line
Resume On LAN This function allows you to turn on the system
Resume On PME# This function allows you to turn on the system
Resume On RTC Alarm When Enabled, you can set the data and time at the
RTC Alarm Date Set a certain date when RTC Alarm Resume option
RTC Alarm Time (hh:
mm:ss)
This option allows you to Disable to Enable on board
Primary/Second IDE controller.
externally on the computer chassis is used.
This function allows you to set whether or not to
Loss restart the system after power interruptions.
(in other words, an incoming call on the modem)
awakens the system from a soft off state.
through a Ethernet Card.
through a PME signal.
which the RTC (Real Time Clock) alarm awakens
the system from suspend mode. Default: Disabled.
is Enabled to awaken the system. This option is
concurrent with Date option.
Set a certain time when RTC Alarm Resume option
is Enabled to awaken the system. This option is
concurrent with Resume Time option.
70