Table of Contents
Advertisement
High Level 2-Channel Lab Scope with built in Multimeter
2. Select Resistance, tap Not connected to search for MAX2CSCOPE. When it is successfully
connected, the diagnostic tool will display connection status.
3. Insert black test pen into COM terminal of MAX2CSCOPE, insert red test pen into V/Ω terminal of
MAX2CSCOPE.
4. Attach black and red test pen to metal part of resistance ends. Keep test pen firmly attached to
resistance.
5. Numerical value will be displayed directly on the diagnostic tool.
Note: you can touch resistance with hands during measurement, but do not touch both ends of
resistance simultaneously, as it will affect measurement accuracy.
4.1.4 Diode Measurement
This MAX2CSCOPE can measure light-emitting diode and rectifier diode. The way test pen is placed
is the same with voltage measurement.
1. Tap Toolbox -> Multimeter on the diagnostic tool to enter the following screen.
2. Select Diode, tap Not connected to search for MAX2CSCOPE. When it is successfully connected,
the diagnostic tool will display connection status.
21
MDMAX2CSCOPE
A
Advertisement
Table of Contents
