Table of Contents
Advertisement
High Level 2-Channel Lab Scope with built in Multimeter
data, oscilloscope settings and Automatic calibration.
• About: Displays the detailed information of the app.
Trigger
3
It can be used to setup trigger condition and trigger type.
Help
4
Trigger information of current channel
Readouts represent storage depth, sample rate and
5
trigger information respectively.
Horizontal trigger position marker
6
Level scale of the Channel 2
7
Edge trigger level marker
8
Channel 1 vertical settings panel
Controls the amplitude of displayed signal. User can
9
change Invert, coupling and probe attenuation
coefficient.
Channel 2 vertical settings panel
Controls the amplitude of displayed signal. User can
10
change
Invert,
coefficient.
Reference channel settings panel
11
Setup reference channel.
RUN/STOP/WAIT
WAIT: All pre-triggered data has been acquired and
the MAX2CSCOPE is ready to accept a trigger.
12
STOP: The MAX2CSCOPE has stopped acquiring
waveform data.
RUN: The MAX2CSCOPE is running.
Auto
It automatically adjusts the vertical scale, horizontal scale
13
and trigger settings.
Single trigger
14
Capture one single trigger, complete acquisition, and
then stop.
coupling
and
probe
7
Check detailed operation
instructions of application.
It shows the working status.
Tap
channel and sets it as the
current channel.
Tap
channel vertical settings.
Tap
attenuation
off the channel.
Tap this button to start auto
setup function.
MDMAX2CSCOPE
A
once - Turns on the
twice - Calls out the
three times - Turns
Advertisement
Table of Contents
