Table of Contents
Advertisement
High Level 2-Channel Lab Scope with built in Multimeter
adjusts the vertical and horizontal scaling, as well as the trigger coupling and position.
3.2.4 Menu Operations
1. Measure
The MAX2CSCOPE provides 6 parametric auto measurements. Tap Measure, the following screen will
appear:
Tap to select the desired measurement item. All selected items will be shown on the left side of the
Clear button.
Tap it to remove the measurement item. The values corresponding to the selected items will be
displayed on the bottom of the screen.
Parameter type
Cycle
Frequency
Peak value
Max value
Min value
AVG value
The following illustrations explain some common measurement items for your reference.
Time for the first signal cycle to complete in the waveform.
Reciprocal of the period of the first cycle in the waveform.
Peak-to-peak = Max-Min, measured over the entire waveform.
Voltage of the absolute maximum level, measured over the entire
waveform.
Voltage of the absolute minimum level, measured over the entire
waveform.
The arithmetic mean over the entire waveform.
Description
14
MDMAX2CSCOPE
A
Advertisement
Table of Contents
