Matco Tools MAXIMUS MDMAX2CSCOPE Instruction Manual page 13

High Level 2-Channel Lab Scope with built in Multimeter
* Note: The ports listed above are measurement ports for multimeter.
6
Handle
7 Power LED
8 State LED
9 Wireless LED
10 Indicator LED
11 CH1
12 CH2
13 I/O Port
14 Power button
 Solid Green: Battery level normal
 Sold Red: Charging.
 Red Flashes: Battery level low, indicating the battery level is
below 20%.
 Solid Green: Working normally.
 Red Flashes: Working abnormally.
 Solid Green: Normally connected.
 Red Flashes: Connecting in progress.
 Not ON: Disconnected.
 Green Flashes: Wrong connection or poor contact.
 Solid Green: Working normally.
Channel 1
Channel 2
1. During charging, it can charge the MAX2CSCOPE with
power adapter and USB cable.
2. During data transmission, it can connect MAX2CSCOPE and
diagnostic tool with USB cable.
Note: The diagnostic tool is not able to provide power
supply to MAX2CSCOPE. Please charge the MAX2CSCOPE
properly.
Press it to turn on/off the MAX2CSCOPE.
5
MDMAX2CSCOPE
A