Table of Contents
Advertisement
High Level 2-Channel Lab Scope with built in Multimeter
Displays basic information of the APP.
3.2.5 Car Test Operations
This function provides all kinds of the testing applications on the automotive parts (including circuits,
sensors, actuators, ignition etc.) and detailed connection methods.
Tap Car test, the following screen will appear:
Tap to select the desired automotive part, the system will automatically configure the option to the
preset parameters. The user does not need to make any settings. Just follow the on-screen instructions
to make connections and proceed.
3.2.6 Cursor Measurement
The Cursor function can be used for assisting in measurement.
Tap
/
to turn on the cursor function and place the cursor on the measurement point to read the
waveform measurement value.
There are two types of cursors: horizontal cursor and vertical cursor. The horizontal cursor measures the
value in the vertical direction, and the vertical cursor can measure the value in the horizontal direction.
When set to ON, two horizontal/vertical reference lines named with Y1 & Y2/X1 & X2 will be displayed
on the waveform display area. The user can use
directly to move it.
Tap
/
again to turn it off.
/
or
/
to fine tune the line or drag the line
17
MDMAX2CSCOPE
A
Advertisement
Table of Contents
