3. Timer Remote Controller (RCS-TM80BG)
10. Setting the present Time
1.
press and hold
for more than 2 seconds to enter in the present
day and time setting mode.
Once you enter in the setting mode,
2.
Set " " to today's day of the week.
1
Press
*
to move " " (flashing on the display) in the order of :
Su
Mo
Tu
.... Press
Fr
....
*1
While in time setting mode, the temperature setting buttons function as
(changing day) button.
3.
press
to change the present "hour" in the range of 0 to 23*
Set the present hour and press
The "hour" digits light up, and the "minute" digits start flashing.
*2
If the clock uses the 12 hours AM/PM setting, the hour is displayed in the range of AM 0 to
11/PM 0 to 11.
4.
press
, to change the present "minute" in the range of 0 to 59.
Set the present minute and press
Note
•
The unit returns to the normal mode if
during the setting. In this case, all the settings in progress will be lost.
•
If the present time is invalid, "– – : – –" is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
, " "(day) and "time" flash.
to move it in the order of : Su
.
. The day and time are set and finishes the setting mode.
is pressed or there is no operation made for 3 minutes
2-22
Remote Control Functions
St
3,4
1,3,4
2
.
2