Setting The Present Time - Sanyo CHDZ07263 Service Manual

3. Timer Remote Controller

3-10. Setting the Present Time

1. Press and hold for more than 2 seconds to enter in the present
day and time setting mode.
Once you enter in the setting mode,
2. Set " " to today's day of the week.
1
Press * to move " " (fl ashing on the display) in the order of :
Su Mo Tu .... Press
Fr ....
*1
While in time setting mode, the temperature setting buttons function as
(changing day) button.
3. Press to change the present "hour" in the range of 0 to 23*
Set the present hour and press
The "hour" digits light up, and the "minute" digits start fl ashing.
*2
If the clock uses the 12 hours AM/PM setting, the hour is displayed in the range of AM 0 to
11/PM 0 to 11.
4. Press , to change the present "minute" in the range of 0 to 59.
Set the present minute and press
NOTE
• The unit returns to the normal mode if
during the setting. In this case, all the settings in progress will be lost.
• If the present time is invalid, "– – : – –" is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
, " "(day) and "time" fl ash.
to move it in the order of : Su
.
. The day and time are set and fi nishes the setting mode.
is pressed or there is no operation made for 3 minutes
2 - 21
Remote Control Functions
St
3,4 1,3,4
2
.
2
1
2
3
4
5
6
7