Sanyo MINI ECO-i XHX1252 Service Manual & Test Run Service Manual page 52

3. Timer Remote Controller (RCS-TM80BG)
List of Simple Setting Items
Filter sign ON time
(filter lifetime)
Central control address
Fan speed when
heating thermostat is
OFF
Heating intake
temperature shift
Cooling-only
NOTE
• In order to avoid water leakage and damage to the fan, do not set for humidifying when the thermostat is OFF
unless a vaporizing humidifier is used.
• Consider the device purpose and type when changing the settings. Incorrect settings may result in malfunction.
• Do not change any setting data that does not appear in this list.
0000 Not displayed
(The optimal setting for that model was set at the time of shipment.)
0001 150 hours
0002 2,500 hours
0003 5,000 hours
0004 10,000 hours
0005 Use the filter clogging sensor.
0001 Central control address 1
0002 Central control address 2
0003 Central control address 3
0064 Central control address 64
0099 No central control address set (setting at time of shipment)
Compressor ON
0000 MED 1 min., LO 3 min.
0 0 0 1 M E D
0 0 0 2 L O
0004 MED 1 min., LO 3 min.
0 0 0 5 M E D
0 0 0 6 L O
0000 No shift
Shifts intake temperature 2°F ( 1°C ) down.
0001
Shifts intake temperature 4°F ( 2°C ) down.
0002
Shifts intake temperature 6°F ( 3°C ) down.
0003
Shifts intake temperature 8°F ( 4°C ) down.
0004
Shifts intake temperature 10°F ( 5°C ) down.
0005
Shifts intake temperature 12°F ( 6°C ) down.
0006
0000 Normal (Setting at time of shipment)
0001 Cooling only
2-34
Remote Control Functions
Compressor OFF
LO
L O
L O
MED
M E D
M E D