Sanyo MINI ECO-i XHX1252 Service Manual & Test Run Service Manual page 44

3. Timer Remote Controller (RCS-TM80BG)
Deleting the program Timer
To delete the program timer setting, follow the steps below.
1. press to enter the program confirmation mode.
2. press / to select the day of the program you want to de-
lete.
3. press / to select a TIMER No. (from 1 to 6).
4. press to display the program setting mode
5. press to delete the program.
Note
After deleting, the unit returns to the program confirmation mode
If you press during the setting, the unit returns to the program
confirmation mode.
If there is no operation made for 3 minutes during the setting, the unit re-
turns to the normal mode.
Invalidating program Timer
If you want to adjourn the program operation for more than 1 week, you can
invalidate all the timer settings.
Once the timer settings are invalidated, the program will not be operated until the invalidation is cancelled.
<<How to invalidate the program timer>>
Press and hold for more than 2 seconds.
is displayed and the programs will be invalidated from the next one.
<<How to cancel the program timer invalidation>>
Press and hold for more than 2 seconds.
disappears and the programs will be validated from the next one.
If power Failure Occurred
If the power recovers in a short time period, the program after the recovered time will be valid.
If the power recovered more than 1 hour after the failure, the present time information will be lost. In this case, the program will
not be operated.
.
.
5
2-26
Remote Control Functions
3 4 1 2