Table of Contents
Advertisement
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable shelf
supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories before
the first use.
Put the accessories and the removable shelf
supports back to their initial position.
5.2 Using the sensor fields
To activate the function press and hold the
selected symbol on the display for at least 1
second.
5.3 Setting the time
You must set the time before you operate the
oven.
The
flashes when you connect the
appliance to the electrical supply, when there
was a power cut or when the timer is not set.
Press the
or
to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
5.4 Changing the time
You cannot change the time of day if any
of the functions operates.
Press
again and again until the indicator
for the Time of Day function flashes.
To set a new time, refer to "Setting the time".
5.5 Preheating
Preheat the empty oven before first use.
1. Set the function
temperature.
2. Let the oven operate for 1 hour.
3. Set the function
temperature.
4. Let the oven operate for 15 minutes.
5. Set the function
temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool down.
Accessories can become hotter than usual.
The oven can emit an odour and smoke.
Make sure that the airflow in the room is
sufficient.
.Set the maximum
. Set the maximum
. Set the maximum
ENGLISH
11
Advertisement
Table of Contents
