Product & Keys Menu (Manager Access) - Eversys Legacy L'2c User Manual

Settings Menu
6.4. Product & Keys menu (Manager access)
The hot water quantity is set in seconds when dispensed from the steam boiler and in
ticks (controlled by the flowmeter) when it is dispensed from the coffee boiler.
Adjustment range is 0 to 1000 ticks. Ticks are approximately equal to ml.
The milk quantity is set in seconds. Adjustment range is 0 to 100 seconds.
With manager access it is possible to modify the following settings.
1. Key Name, press to type in a new name (maximum 13 characters).
2. Key Icon, press to select another product picture.
3. Water Quantity, press to modify the number of ticks or seconds (adjust with the slider or up/
down keys).
4. Learn Quantity:
a. Press Learn Quantity to dispense a coffee.
b. When the desired level is in the cup, press the same button to stop the drink. This memorises
the number of ticks (or seconds).
5. Browse to the next menu.
6. Press one of the line under the Milk sequence to open available settings (only for milk products
and if you have a fridge).
7. Press the line under the Powder sequence to open available settings (only for powder products
and if you have a choco module or a powder unit).
8. Milk Quantity (only for milk products and if you have a fridge), press to modify the numbers of
seconds or Learn Quantity.
9. Water Quantity (only for powder products and if you have a choco module or a powder unit),
press to modify the quantity (in ml).
10. Product test
Ensure that at least 6 beverages are run using Product Test to achieve the desired coffee and
extraction time and that the grinder is delivering the correct amount of coffee for the set cake
thickness.
To adjust see Bean & Grinder menu (page 57).
02.01.2023 Page 53 of 133 © Eversys S.A.