Steam Wand Is Clogged; Cups On The Cup Heater Are Not Warm Enough - Eversys Legacy L'2c User Manual

Troubleshooting

8.6.4. Steam wand is clogged

• The steam wand needs to be purged before and after every product preparation (page 40).
Not using the purge will slowly block the pipe inside. Make purging your regular
procedure or refer to Steam purge button (page 40).

8.6.5. Cups on the cup heater are not warm enough

• Cups can be topped up to a maximum of 2 layers to have an effective cup heating function.
• The cup heater is not intended to keep cups warm in a cold air flow (e.g. near an open window or
door).
• Contact your service engineer to verify the heating panel settings.
02.01.2023 Page 105 of 133 © Eversys S.A.