Eversys LEGACY L'2c/Classic User Manual
  1. Manuals
  2. Brands
  3. Eversys Manuals
  4. Coffee Maker
  5. LEGACY L'2c/Classic
  6. User manual

Eversys LEGACY L'2c/Classic User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
Published on 29.06.2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEGACY L'2c/Classic and is the answer not in the manual?

Questions and answers

Related Manuals for Eversys LEGACY L'2c/Classic

Summary of Contents for Eversys LEGACY L'2c/Classic

  • Page 1 User Manual Published on 29.06.2022...
  • Page 2 This page is intentionally left blank.

  • Page 3: Table Of Contents

    2.3.6. Environmental conditions for Eversys coffee machines ......... 30 2.4. e'Connect (Telemetry) ..................31 2.5. Coffee process flow ....................32 2.6. Automated cleaning process flow (with Eversys milk cleaning ball ) ..... 33 2.6.1. Process (coffee) ..................33 2.6.2. Process (milk) ................... 33 2.6.3.
  • Page 4 6.7.1. Standby after cleaning ................79 6.7.2. Standby On / Off times ................79 6.8. Password menu ....................80 6.9. Logout (service engineer) ..................81 7. Care ..........................83 Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 4 of 161...
  • Page 5 7.2.1. Cleaning plan (options included) ..............85 7.2.2. Overview of cleaning on Légacy machines ..........86 7.3. Cleaning procedures (standard) ................87 7.3.1. Refill and visual check of the Eversys cleaning ball dispensers ....87 7.3.2. Automatic system cleaning procedure with Eversys milk cleaning ball Légacy machines (milk and powder unit included) ..........
  • Page 6 11.3.5. User rights in the Clean / Standby menu ........... 159 11.3.6. User rights in the Password menu ............160 11.3.7. Other settings and parameters ..............161 Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 6 of 161...

  • Page 7: For Your Safety

    Before carrying out any operation on the machine, it is imperative to read this chapter and fully understand it. In case of any doubt, consult your local service organisation. Page 7 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 8: Intended Use Of Coffee Machines

    • s; coffee, hot water, steam and powder based products (depending on option). • ms; coffee, hot water, steam, milk and powder based products (depending on option). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 8 of 161...

  • Page 9: Safety Introduction

    Disregarding the safety rules, as well as existing legal and technical regulations, may lead to acci- dents, damage to property or environmental pollution. Disregarding the instructions for use given by the manufacturer may reduce the level of protection offered by the machine. Page 9 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 10: Directives

    This machine complies with all applicable European Community Directives and associated harmon- ised standards. For more information refer to our Declaration of Conformity (scan the QR code below) or contact your service organisation. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 10 of 161...

  • Page 11: General Safety Instructions

    Requirement for Australian deviation: disconnection incorporated in the fixed wiring is in accordance with AS/NZS 3000. Do not immerse the appliance in water. Page 11 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 12 Safety data sheets are available under the e'Support center (https://support.ever- sys.com/hc/en-us). It is imperative to use only the products, accessories, spare parts and software specified in manuals (e.g. User Manual). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 12 of 161...
  • Page 13 / manager. The work must be carried out by authorised installation technicians in compliance with general, country-specific and local regulations. Eversys service or- ganisations may only connect the machine to existing prepared connection points.
  • Page 14 Care [83]. Only use original Eversys cleaning products. Use of products that are not explicitly recommended by Eversys could damage the machine or void warranty. It is forbidden to clean the machine with a water jet or a water spray.

  • Page 15: Information For Disposal

    Separate collection of electric and electronic equipment. This machine is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). General symbol for recovery/recyclable. Page 15 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 16: Decommissioning And Disposal

    1.6.2. Removal of equipment Disconnect the coffee machine from the power supply and water mains. If the coffee machine is hardwired, it must be disconnected by an authorised service agent. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 16 of 161...

  • Page 17: Special Safety Instructions And Signs

    Avoid contact with skin and eyes Main switch Power ON Main switch Power ON Main switch Power OFF Main water inlet Water tap open Main water inlet Water tap closed Protective earthing Page 17 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 18: Packaging Signs For Coffee Machines

    Maximum and minimum temperature limit Stacking limit by number Not to be vertically stacked higher than the specified number of items «n» Phytosanitary treatment of the pallet Serial Number Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 18 of 161...

  • Page 19: Description

    Description 2. Description This chapter offers a general overview and presentation of the machine. Page 19 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 20: Identification

    Electronic Milk Texturing (EMT) (coffee outlet) 1.5-Step (machine option) e'Levelling Front LED Bean hopper level alert CCI / CSI / API Connection e'Connect (Telemetry) Tempest (machine option) Earth (machine option) Custom colour Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 20 of 161...

  • Page 21: Légacy Machines Range (Visuals)

    The rating plate (type plate) is located on the right foot under the machine. Please copy the following information from the identification label in the fields below: Page 21 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 22 Description Machine Type Serial Number (SN) Symbol Description Manufacturer's reference (order number) Serial Number Date of manufacture (week + year) Manufacturer EC (CE) Mark (European Union) Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 22 of 161...

  • Page 23: Overview

    (Service engineer [143] access) Powder unit access panel Coffee outlet (10) Hot water outlet (other options are available) For more information about options (e.g. 1.5-Step or red lid for Eversys cleaning balls ), refer to Options [129]. Page 23 of 161 Published on 29.06.2022...

  • Page 24: Access To The Main Switch And The Water Inlet On Légacy Machines

    The display of products and buttons depends on the settings. Illustrations show software V3.17. Illustrations show monochrome style. The touch screen and the graphical user interface are touch-sensitive. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 24 of 161...
  • Page 25 Software [35]) Standby button [49] Display of the stop and standby buttons also depend on the settings. For more information, refer to User Rights [150]. Page 25 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 26: Top View (Bean Hopper) Of Légacy Machines

    Bean hopper with lid (Position 3) (other options Cleaning module lid (with locking system) are available) Powder containers with lid (Position 4) (option- al) (other options are available) For more information about options (e.g. 1.5-Step or red lid for Eversys cleaning balls ), refer to Options [129].

  • Page 27: Technical Data

    0.6 L Steam boiler 0.8 L Grounds drawer 400 g *measured from the drip tray For more information about options (e.g. 1.5-Step or red lid for Eversys cleaning balls ), refer to Options [129]. Page 27 of 161 Published on 29.06.2022...

  • Page 28: General Technical Data Of The Légacy Powder Unit (Machine Option)

    The power cord must be in accordance with local regulations. Adjustment of the frequency is automatic. No action is required. General information Description L'2c, L'2m, L'2s, L'2ms Frequency 50/60 Hz Power consumption (standby mode) < 2W Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 28 of 161...

  • Page 29: Water Specifications Of Légacy Machines

    If the pressure exceeds 4 bars (58 psi), it is necessary to install a pressure reducer. Water quality recommendation Description L'2c, L'2m, L'2s, L'2ms Carbonate hardness max. 6° dKH (107 ppm) Page 29 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 30: Environmental Conditions For Eversys Coffee Machines

    L'2c, L'2m, L'2s, L'2ms pH value ideal 7.0 - 7.2 Total hardness 5 - 8° dGH (89-142 ppm) 2.3.6. Environmental conditions for Eversys coffee machines Do not use the machine outside of the defined ranges of environmental conditions. Description Coffee machines Operating temperature 10 to 32 °C...

  • Page 31: E'connect (Telemetry)

    It is possible to provide dashboards to enable you to converge data into simple reporting. Specific user rights are necessary to access the telemetry system. Contact your service organisation for more information. Page 31 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 32: Coffee Process Flow

    It will then brew and dispense the product according to your request. Grinding Eversys - designed ceramic burrs driven by a powerful yet quiet motor, whose heat is cleverly channelled away from the coffee beans, to maintain their quality, via a set of fans. Electronic control maintains consistency of product throughout the day, ensuring optimal extraction at all times.

  • Page 33: Automated Cleaning Process Flow (With Eversys Milk Cleaning Ball Tm )

    (no daily manual addition of the ball or detergent necessary). Note that the container for the milk system is bigger than the standard Eversys cleaning ball 2.6.1. Process (coffee) Start cleaning, press Rinse [51] or as desired.
  • Page 34 This page is intentionally left blank. Published on 29.06.2022...

  • Page 35: Software

    This chapter describes the machine software at a glance. The display of products and buttons depends on the settings. Illustrations show software V3.17. Illustrations show monochrome style. Page 35 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 36: Using The Touch Screen

    • Press and hold to open login or e.g. start automatic cleaning. • Slide to adjust settings. Only use your fingers to select a product /press the touch screen. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 36 of 161...

  • Page 37: Main Screen

    Access to login menu [68]) or press to open the Top lay- er [38] To change the language, time zone and date, please refer to Display menu [75]. Page 37 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 38: Top Layer

    Milk two button (press to select milk two) Steam purge button [53] Extraction time (seconds) Product layer page # (press to access other products) Warning message [100] Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 38 of 161...

  • Page 39: Product Buttons (Default)

    Coffee powder - Decaf (Special Espresso macchiato product) Americano (long black) Latte macchiato Coffee pot Milk Filter coffee Manual steam Hot water (Tea) Auto steam Choco Everfoam 1.5-Step Page 39 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 40: Grinder Button

    User rights in the Display menu [153]). The grinder button opens the Grinder Adjustment menu. For more information about grinder adjustment, refer to Bean & Grinder menu [78]. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 40 of 161...

  • Page 41: Specific Settings

    Software 3.5. Specific settings Settings are done by the Eversys service organisation. If wishing to change factory parameters, make sure to go through the User Rights [150] with your service engineer during commissioning. Page 41 of 161 Published on 29.06.2022...
  • Page 42 This page is intentionally left blank. Published on 29.06.2022...

  • Page 43: Commissioning

    Commissioning 4. Commissioning Page 43 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 44: Initial Commissioning

    Your service organisation will put your coffee machine in operation for the first time and instruct you on its operation. Subsequent recommissioning, decommissioning or any service and repair operations will also be undertaken by your service organisation. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 44 of 161...

  • Page 45: Requirement Prior To Initial Commissioning

    Total hardness: 5 - 8° dGH (89-142 ppm) Carbonate hardness: Max. 6° dKH (107 ppm) pH value: ideal 7.0 - 7.2 Chlorine (Cl) max. 10 mg/l Page 45 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 46 This page is intentionally left blank. Published on 29.06.2022...

  • Page 47: Operation

    For more information, contact your service organisation. The display of products and buttons depends on the settings. Illustrations show software V3.17. Illustrations show monochrome style. Page 47 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 48: Daily Setup Guidelines

    Fill a milk tank (machine option) [55]. Fill the cups heating surface with cups (machine option) [57]. 10. If necessary, fill with Eversys cleaning balls [87]. 11. Enjoy your drink! Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 48 of 161...

  • Page 49: Switch On A Machine

    5.2.2. Standby (wake up) If the machine is already switched on and in standby mode, press and hold (3s) the standby button (1) to power up. Figure 1. Page 49 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 50 Standby mode switches off all the functions like heating the boiler, the touch screen and the front lighting to save energy. It is possible to use this function to switch off, for instance overnight. Power usage is less than 2W. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 50 of 161...

  • Page 51: Rinse

    Depending on settings, the Rinse button will display either in the products area or on the Top layer [38]. Refer to User rights in the Display menu [153]. Page 51 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 52: Pre-Heat Rinse

    Rinsing is not a substitute for daily cleaning! Auto-rinsing is necessary to remove residue build-up in the coffee and milk systems. The coffee machine automatically rinses after certain time intervals as well as when it is switched ON or OFF. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 52 of 161...

  • Page 53: Steam Purge Button

    Press the blinking purge button on the main screen (1). Wipe the steam wand with a damp cloth (2). Change cloths every day. On the screen that displays, press purge (3). Page 53 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 54: Fill The Coffee Bean Hoppers

    When unlocked the bean hopper is loose, and it will not be possible to grind coffee (closed position). Fill with fresh coffee beans. Close the lids (1). Close Open Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 54 of 161...

  • Page 55: Fill A Milk Tank (Machine Option)

    Ensure to insert the milk tube (2) inside the milk tank and that it correctly lays on the bottom of the milk tank. Close the door. max. 3°C (37°F) Page 55 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 56: Fill The Powder Containers (Machine Option)

    Ensure that no foreign object gets into the mixers. This may block or damage them. Remove the cover(s) (1). Fill with powder. Replace the cover(s) (1). Powder 1 Powder 2 Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 56 of 161...

  • Page 57: Fill The Cups Storing Surface

    Operation 5.8. Fill the cups storing surface • Fill the cups storing surface with cups. For more information about options (e.g. 1.5-Step or red lid for Eversys cleaning balls ), refer to Options [129]. Page 57 of 161 Published on 29.06.2022...

  • Page 58: Make A Drink

    All product buttons function as start/stop buttons. Press the button to start dispensing the product and, if necessary, to stop dispens- ing manually: press the same product button again. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 58 of 161...

  • Page 59: Dispense A Double Coffee Product

    Adjust the coffee spout height [58]. Place a cup under the coffee outlet or the hot water outlet. Press the hot water product. Wait for the product to dispense. Page 59 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 60: Dispense A Product With Steam

    Adjust the coffee spout height [58]. Place a cup under the coffee outlet. Press one of the powder product (e.g. Choco). Wait for the product to dispense. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 60 of 161...

  • Page 61: Product Stop

    Depending on settings, the STOP button may not be displayed in the products area. Refer to User rights in the Display menu [153] for more information. To stop dispensing of all products, press the stop button. Page 61 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 62: Empty And Clean The Grounds Drawer

    5.11. Empty and clean the grounds drawer RISK OF BURNS OR SCALDING After first startup or during cleaning, the grounds drawer may contain hot water, empty it carefully Automatic system cleaning procedure with Eversys milk cleaning ball on Légacy machines (milk and powder unit included) [87].

  • Page 63: Switch Off A Machine

    Empty the grounds drawer, clean and dry it. On specific conditions (e.g. long term storage, actions on water pump ...), close the main water inlet tap (3). Replace the grounds drawer (1). Close Open Page 63 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 64: End Of The Day Guidelines

    Switch off [63] at the main power switch. standby [49] with the standby button. Or set standby [79] programming (with super user access). Have a nice evening ahead! Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 64 of 161...

  • Page 65: Emergency Stop

    The machine must be located in such a manner that the main switch and power cord are accessible at all times. The mains power socket must be located near the machine and must be easily accessible by the operator. Page 65 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 66 This page is intentionally left blank. Published on 29.06.2022...

  • Page 67: Settings Menu

    The display of these chapters depends on your access level. Please refer to User Rights [150] for more information. The display of products and buttons depends on the settings. Illustrations show software V3.17. Illustrations show monochrome style. Page 67 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 68: Access To Login Menu

    User access lets you view statistics (product counter) and cleaning history. Super user access is a limited access for product settings, display, statistics and history functions. Advanced user access is a full access. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 68 of 161...

  • Page 69: Use Of The Software Menu

    7. Learn Quantity, use this button to adjust the quantity of water or milk depending on the product. 8. Browse menu. 9. Browse layers. 10. Navigate to previous menu. Page 69 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 70: Statistic / History Menu

    Product Counter [70] • Machine counter (advanced user access only) • History [71] (Cleaning history) It is possible to reset counters if necessary. 6.3.1. Product counter menu Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 70 of 161...

  • Page 71: History Menu

    Settings Menu Product counter sub menu 6.3.2. History menu History sub menu Page 71 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 72: Product & Keys Menu (Manager Access)

    Adjustment range is 0 to 1000 ticks. Ticks are approximately equal to ml. The milk quantity is set in seconds. Adjustment range is 0 to 100 seconds. With manager access it is possible to modify the following settings. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 72 of 161...

  • Page 73: Everfoam Tm And Auto Foam Products

    With these steam products it is possible to control the Stop Temperature and Foam Texture. 6.4.2. Hot water products With hot water products it is possible to control the Water Quantity and Water Temperature. Page 73 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 74 Settings Menu Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 74 of 161...

  • Page 75: Display Menu

    6.5.1. Set time and date Follow the screen instruction. Set time and date if needed. 6.5.2. Time zone Choose time zone to get correct daylight saving time. Page 75 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 76: Front Lighting

    Store the ".Language" file in the main directory of the USB drive. The button Delete All Languages removes all languages except for English. Languages can be imported by pressing Start Import. Follow the instructions displayed. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 76 of 161...
  • Page 77 Settings Menu Page 77 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 78: Bean & Grinder Menu

    Adjust by setting the grinder either finer or coarser to increase or decrease the extraction time. Average extraction time for two espressos at 25 ml each is 21 to 23 seconds. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 78 of 161...

  • Page 79: Clean And Standby Menu (Super User Access)

    • Yes (machine switches to standby mode after cleaning). 6.7.2. Standby On / Off times Set time an choose the days. The machine will automatically switch on, rinse and heat up according- Page 79 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 80: Password Menu

    Never give your password to untrained users. Incorrect entries or changes may reduce the quality of drinks. Make sure to remember the passwords. Two access levels are available. A password can be defined for each level. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 80 of 161...

  • Page 81: Logout (Service Engineer)

    Settings Menu 6.9. Logout (service engineer) If a service engineer forgot to logout, check that nobody is still working on the machine and press Logout (1). Page 81 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 82 This page is intentionally left blank. Published on 29.06.2022...

  • Page 83: Care

    [143]. Only use original Eversys cleaning products. Use of products that are not explicitly recommended by Eversys could damage the machine or void warranty. Ensure that no one ever ingests these cleaning solutions.

  • Page 84: Cleaning And Maintenance Operations

    Repair, commissioning and service operations must only be performed by a service organisation appointed by the manufacturer. The service of Eversys coffee machines depends on the number of brewing chambers: • Légacy range: 12 months or every 50'000 products. Please contact your local service organisation for any maintenance tasks.

  • Page 85: Periodic Cleaning

    Milk tank and milk fridge [95] (machine op- tion) Choco outlet [96] (machine option) Powder containers [96] (machine option) Steam wand [97] (machine option) Steam wand nozzle [97] (machine option) Page 85 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 86: Overview Of Cleaning On Légacy Machines

    Care 7.2.2. Overview of cleaning on Légacy machines V = Visual inspection, C = Clean Daily Weekly Monthly Or as required Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 86 of 161...

  • Page 87: Cleaning Procedures (Standard)

    Care 7.3. Cleaning procedures (standard) 7.3.1. Refill and visual check of the Eversys cleaning ball dispensers IRRITANT PRODUCTS Everclean and Eversys cleaning ball should be considered potentially dangerous. When performing any operation on the machine, local safety regulations must be followed.
  • Page 88 Place the milk tube inside the cleaning tank (3). Ensure that it correctly lays at the bottom of the tank. • Place the empty cleaning tank inside of the fridge. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 88 of 161...
  • Page 89 • Separate the mixer (tube (5), powder chanel (8), base (9) and cover (10)). • Clean all under clean tap water with soft soap. Dry the parts. Page 89 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 90 Wait for the cleaning to complete. RISK OF BURNS OR SCALDING During automatic cleaning, hot cleaning solution and steam are released sever- al times. Keep hands and skin away from the outlets. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 90 of 161...
  • Page 91 Clean the milk tank tube with a damp single-use cloth and replace the milk tank (2) in the fridge. • If necessary, fill the milk tank [55]. • Ensure that milk tank tube correctly lays at the bottom of the tank. max. 3°C (37°F) Page 91 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 92: Clean The Coffee Outlet (Milk Outlet And Single Outlet Included)

    Empty the grounds drawer in a sink and clean it with soft soap. RISK OF BURNS OR SCALDING After first startup or during cleaning, the grounds drawer may contain hot water, empty it carefully Automatic system cleaning procedure with Eversys milk cleaning ball on Légacy machines (milk and powder unit included) [87].

  • Page 93: Empty And Clean The Bean Hoppers (And Powder Chute (Machine Option))

    Make sure that the bean hoppers are perfectly dry before refilling with coffee beans. Close Open 7.3.5. Clean the housing Switch off [63] at the main power switch. Clean the housing with a damp cloth. Page 93 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 94: Clean The Display (Touch Screen)

    Remove the drip tray grid (1). Wash the grid and inside of the drip tray (2) with soft soap and rinse. Replace the drip tray grid (1). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 94 of 161...

  • Page 95: Cleaning Procedures (Depending On The Model And Options Of The Machine)

    Clean all parts (milk tank tube(s) included) and the inside of the fridge with soft soap, rinse with water and dry with a soft cloth. Reassemble in the reverse order. If necessary, fill the milk tank [55]. Close the door. Page 95 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 96: Clean The Choco Outlet (Machine Option)

    7.4.3. Empty and clean the powder container(s) (machine option) Depending on machine model and options, this feature may not be available. For more information, contact your service organisation. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 96 of 161...

  • Page 97: Clean The Steam Wand

    Depending on machine model and options, this feature may not be available. For more information, contact your service organisation. Only necessary to clean the nozzle monthly or if required. Page 97 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 98 Remove the nozzle (1). Wash the nozzle with soft soap and clean water using a soft brush (2). Tighten the nozzle (3). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 98 of 161...

  • Page 99: Troubleshooting

    It is imperative to read and understand this manual before carrying out any trouble- shooting on the machine. In case of unclear information, please contact your local service organisation. Illustrations show software V3.17. Illustrations show monochrome style. Page 99 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 100: Error Message Example

    Troubleshooting 8.1. Error message example All Eversys coffee machines are equipped with an internal troubleshooting and error message system. The following screen shows an example. If an action of the user is required, the warning sign (1) is displayed. Press the warning sign (1) to display the warning message and required action.

  • Page 101: Error Messages Codifications

    The machine can still be used but with some restrictions Critical Advanced user has to come immediately Machine blocked! 8.2.3. Behaviours Symbol Description Visible for user Shown repeatedly Logged in the error history [150] Page 101 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 102: Error Messages (E-Xxx) (User And Super User Access)

    E-012 Milk Milk unit not Contact service organisation. module connected. Water pump has been switched off. E-013 Brewing Brewing unit Contact service organisation. module not connected. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 102 of 161...
  • Page 103 Continue. E-104 Steam Timeout Steam Switch the machine OFF, wait module Heating. 10 sec. and turn it back ON. If doesn’t work, contact service organisation. Page 103 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 104 Touch tion Error. set together. screen Please turn the For more information, refer to coffee machine E-099 [103]. off, wait 10 s and turn it on again. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 104 of 161...

  • Page 105: Stop Messages (S-Xxx) (User And Super User Access)

    / E'line: Bean hopper front missing. S-004 Grounds Please empty The grounds drawer must be drawer the grounds emptied before the cleaning drawer. can be started [62]. Page 105 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 106 The bean hopper has to be re- Enigma / Shot- filled or open [54]. master / E'line: Bean hopper rear is empty or closed. Please refill or open the bean hopper. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 106 of 161...
  • Page 107 Cleaning neces- Press and hold the rinse key for Touch sary. five seconds to start the clean- screen ing. Please press Continue to start the clean- ing. Page 107 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 108 50ml Everclean container (press pump twice). with XXml b. E'2ms / Cameo: 25ml Everclean Everclean (press (press pump once). pump). 3. Press "Continue". 3. Press "Con- tinue". Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 108 of 161...
  • Page 109 Please refill or The left bean hopper has to be open the bean refilled or open. hopper. Page 109 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 110 This message occurs if the module off the ma- steam boiler has been emptied chine. or depressurized. The coffee machine has to be switched off (main switch). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 110 of 161...
  • Page 111 CCI). water products are locked. Please check the interface connection and setting. S-109 Display / Display open. Contact service organisation. Touch screen Please close the display proper- Page 111 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 112: Warning Messages (W-Xxx) (User And Super User Access)

    W-006 Cleaning Check cleaning Contact service organisation. balls dis- ball dispenser. penser • Blocked or broken clean- ing balls? • Light barrier dirty? Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 112 of 161...
  • Page 113 W-012 Brewing Brewing unit in- Contact service organisation. module itialisation failed right. The right brew- ing unit is blocked. => Please check the right brew- ing unit. Page 113 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 114 W-021 Brewing Top piston fail- Contact service organisation. module ure right. The machine tries to unblock the piston au- tomatically. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 114 of 161...
  • Page 115 • Check also if the time zone is correct on the display(s). If the message still appear af- ter manually setting the date and time and restarting the machine, please contact your service technician. Page 115 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 116 The milk system None or not sufficient deter- module was cleaned gent detected for a proper without deter- cleaning of the milk system. gent. Please use Ever- clean Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 116 of 161...
  • Page 117 (left). Please check the milk system and tubes. W-046 Milk Milk tempera- Contact service organisation. module ture too high (right). Please check the milk system and tubes. Page 117 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 118 Enigma / Shot- master / E'line: Bean hopper front. Check if the fan is dirty or blocked by beans. Check if the fan is dirty or blocked by beans. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 118 of 161...
  • Page 119 Use and refill only cooled Please fill the milk [55]. milk tank with cold milk. W-060 Milk Milk unit not Contact service organisation. module connected. Page 119 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 120 Contact service organisation. module been opened more than 20 ticks since the last calibration. Cameo: Bean hopper right. Enigma / Shot- master / E'line: Bean hopper front. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 120 of 161...
  • Page 121 Cameo: Close the right bean hopper. Enigma / Shot- master / E'line: Close the front bean hopper. Press Continue to start auto- matic grinder unblocking. Page 121 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 122 Consult the rinse history for more informa- tion. Check the coffee nozzle and screens of the right brew- ing unit. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 122 of 161...
  • Page 123 15 right is too ticks /s. high. Contact service organisation. Consult the rinse history for more informa- tion. Page 123 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 124 Light barrier detected no cof- hopper too low. fee beans in right hopper. Please refill the Refill bean hopper [54]. bean hopper. If warning remains, please contact your service techni- cian. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 124 of 161...
  • Page 125 Check if it is blocked. W-093 Powder The powder Contact service organisation. unit pump of the powder unit doesn't run. Page 125 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 126 W-104 Steam Steam wand Steam or Everfoam blocked! module right tempera- ture sensor fail- Contact service organisation. ure. Please check the tempera- ture sensor and cable. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 126 of 161...

  • Page 127: Faqs

    • The cup heater is not intended to keep cups warm in a cold air flow (e.g. near an open window or door). • Contact your service engineer to verify the heating panel settings. Page 127 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 128 This page is intentionally left blank. Published on 29.06.2022...

  • Page 129: Options

    Options 9. Options This chapter describes machine options. Page 129 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 130: List Of Options For Légacy Machines

    3 x Grinders [136] 4 x Grinders [136] Powder unit [138] Steam wand with Everfoam [134] Standard Hot water outlet [135] Standard 2 milk types [132] Double coffee outlet [133] Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 130 of 161...

  • Page 131: Fridges (Accessory)

    Fridges that are used with coffee machines are exclusively intended to store cold beverages for human consumption. The design of the Vitrifrigo FG20 matches perfectly with the use of Légacy machines. General public fridges (e.g. fridge placed under the counter) can also be used with Eversys machines. Page 131 of 161 Published on 29.06.2022...

  • Page 132: Milk Types Option

    If using e.g. regular milk on milk tank #1 and e.g. soy milk on milk tank #2, it is not possible to guarantee Lactose-Free Milk on milk tank #2. This option enables the possibility to dispense products with two different types of milk. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 132 of 161...

  • Page 133: Double Coffee Outlet Option

    The double coffee outlet allow you to dispense two products at the same time (e.g. 2 x espresso). Double coffee outlet 2. Double milk outlet 3. Double water outlet 4. Choco/powder outlet (machine option) Page 133 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 134: Steam Wand With Everfoam Tm Option

    The steam wand with the Everfoam technology allows to create a perfect foam to make latte art. The sensor controls the temperature to avoid milk to burn. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 134 of 161...

  • Page 135: Hot Water Outlet Option

    Options 9.6. Hot water outlet option The hot water outlet allows you to dispense hot water product through a dedicated outlet. Page 135 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 136: Grinder(S) Option

    The 2 x grinders option, in this configuration, allows the use of 2 x bean hoppers (1 x 0,5 kg and 1 x 1 kg) and a cups storage panel. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 136 of 161...

  • Page 137: X Grinders

    The 4 x grinders option allows the use of 4 x bean hoppers (2 x 0,5 kg and 2 x 1 kg) and a very small cups storage panel. Page 137 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 138: Powder Unit Option

    Options 9.8. Powder unit option The powder unit allows to dispense powder products (e.g. Chocolate, Chai latte ...). Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 138 of 161...

  • Page 139: Warranty And Generalities

    Warranty and Generalities 10. Warranty and Generalities This chapter describes the warranty limitations and basic information on the machine and the docu- ment structure. Page 139 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 140: Warranty

    (whichever comes first) from the date of installation. Eversys will repair or replace at its discretion part or all of the product not conforming to this war- ranty. Eversys’ responsibility under this warranty is limited to the repair or replacement of defective parts and not to wear and tear parts and maintenance products.

  • Page 141: Warranty Limitation

    • Damage due to improper storage; • Use contrary to the instructions given in this manual or according to information other than the manufacturer’s original tips. Each machine is tested by Eversys S.A. before shipping. Page 141 of 161 Published on 29.06.2022...

  • Page 142: Glossary

    User Basic The term User Basic is the owner of a machine both when using it as its owner and when transferring it to a third-party. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 142 of 161...

  • Page 143: Injury

    This is the coffee machine manufactured by Eversys S.A. Everfoam (e'Foam) The Eversys' improved Foam system provides a 2-step barista solution. This generation of Everfoam (e'foam) allows you to texture the milk by product type. This is done through the MAD system controlled electronically.
  • Page 144 A piccolo latte is a caffè latte made in an espresso cup. This means it has a very strong but toned-down espresso taste thanks to the steamed milk and micro foam within it. Decaf Decaffeinated coffee. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 144 of 161...

  • Page 145: Typographical Conventions

    [145]. • Software buttons: text in bold style is used (e.g. OK, Save, Rinse). • List of numbers: text linked to an illustration (1, 2, 3). Page 145 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 146 This page is intentionally left blank. Published on 29.06.2022...

  • Page 147: Appendix

    Appendix 11. Appendix Page 147 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 148: Equipment List Of Légacy Machines

    Water inlet hose (3/8" - 3/8", L = 2 m) Hose clamp 16-27 mm Drain hose (Ø22/16 - 2 m) Drain connection Eversys milk cleaning ball™ (machines with milk only) Cleaning container (machines with milk only) General Safety Instructions Quick Start Guide - QRC...

  • Page 149: Spare Parts Ordering

    Appendix 11.2. Spare parts ordering Please contact your local service organisation or connect to the Webshop (https://webshop.ever- sys.com/sales_ev(bD1mciZjPTQwMA==)/index.do). Page 149 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 150: User Rights

    [70] • Period Counter Product counter menu [70] • Total Counter Product counter menu [70] Machine Counter History • Product History • Error History • Cleaning History Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 150 of 161...

  • Page 151: User Rights In The Product & Keys Menu

    Contact service or- ganisation. Water Quantity [tick] Product & Keys menu (Manager access) [72] Cake Thickness [mm] 14,0 Contact service or- ganisation. Tamping [kg] Contact service or- ganisation. Page 151 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 152 Contact service or- ganisation. Appearance White on Contact service or- ganisation. Milk Delay Time [s] Contact service or- ganisation. Milk Sequence(s) Pop up Powder Sequence Pop up Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 152 of 161...

  • Page 153: User Rights In The Display Menu

    Left Contact service or- ganisation. Water Quantity [ml] Powder Density [g/100ml] 5,0 +/- 1 Contact service or- ganisation. 11.3.3. User rights in the Display menu Page 1/3 Page 153 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 154 Number of Keys per Layer Contact service or- ganisation. Screensaver Display menu [75] Front Lighting Display menu [75] Front Lighting Brightness Display menu [75] Display Brightness Contact service or- ganisation. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 154 of 161...
  • Page 155 Contact service or- ganisation. Show Stop Key Contact service or- ganisation. Show Product Prices Contact service or- ganisation. Show Product Key Symbols Auto Contact service or- ganisation. Page 155 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 156: User Rights In The Beans & Grinder Menu On Légacy Machines

    11.3.4. User rights in the Beans & Grinder menu on Légacy machines Illustrations show picture of Cameo machines. Légacy machine screens will be based on this philosophy. Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 156 of 161...
  • Page 157 [78] Grind Hopper Right Bean & Grinder menu [78] Finer (-) [1/100 mm] Bean & Grinder menu [78] Coarser (+) [1/100 mm] Bean & Grinder menu [78] Page 157 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 158 Contact service or- menu ganisation. (if one of the ETC is activated (ON)) Grinder adjustment sub- Contact service or- menu ganisation. (standard view for the user and super user) Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 158 of 161...

  • Page 159: User Rights In The Clean / Standby Menu

    Contact service or- pacity Left [mm/s] ganisation. Lower Limit Grinding Ca- 1,00 Contact service or- pacity Right [mm/s] ganisation. 11.3.5. User rights in the Clean / Standby menu Page 159 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.

  • Page 160: User Rights In The Password Menu

    11.3.6. User rights in the Password menu Parameter User Super More infor- fault user vanced mation user Operator Password menu [80] • Change password Password menu [80] Manager Password menu [80] Legacy User Manual © Eversys S.A. Published on 29.06.2022 Page 160 of 161...

  • Page 161: Other Settings And Parameters

    • Change password Password menu [80] Technician Password menu [80] • Change password Password menu [80] 11.3.7. Other settings and parameters Contact your service organisation for more information. Page 161 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.
  • Page 164 H E A D Q U A R T E R R E G I O N A L O F F I C E S E V E R S Y S S . A. E V E R S Y S A S I A E V E R S Y S I N C E V E R S Y S U K &...

This manual is also suitable for:

Legacy l'2m/classicLegacy l'2s/classicLegacy l'2ms/classic

Table of Contents

Save PDF