Automatically Resize Paper; Watermarks; Poster Print; Fit To Page - Oki B930dn User Manual

A
UTOMATICALLY RESIZE PAPER
The printer can automatically select from the paper, which is closest to the paper requested
for the print job. The printer will then scale the job to fit the available paper.It includes
scaling A4 to letter and letter to A4; and A3 to Tabloid and Tabloid to A3. You can enable
this at the control panel's Paper menu.
W
ATERMARKS
A watermark is typically faint text that is superimposed on a printed document. This can
used to indicate that the document is "Draft", or perhaps "Confidential".
P
OSTER PRINT
This option allows you to print posters by dividing a single document page into multiple
pieces (sometimes called "tiles"). Each piece prints, enlarged, on a separate sheet. Then,
you combine the separate sheets to create a poster.
F
IT TO PAGE
Scale to Page allows you to print data formatted for one size page onto a different size
page, without modifying the print data.
B
OOKLETS
Booklet printing allows printing of multipage documents with their pages ordered and
arranged so that final printed output can be folded into a booklet. Typically, A4 (or A3)
pages would be reduced to A5 (or A4) and printed side by side on both sides of A4 (or A3)
paper, so that the paper can be folded into a booklet.
S -
ECURE PRINT PRINT CONFIDENTIAL DOCUMENT
Secure Print is a feature that allows you to attach a PIN to a print job on the computer,
send it to the printer for temporary storage, and then print the job from the printer control
panel. When the printing of a Secure Print job is complete, the job is automatically deleted.
S
TORED JOB
A stored job is the same as a secure print job except that it is not deleted from the storage
device after it is printed unless you specifically ask for this at the printer control panel. By
storing frequently-used data in the printer, you can print the job from the printer control
panel, without sending it from the computer again and again.
P -
ROOFPRINT PRINT AFTER CHECKING PRINTING RESULT
You can select this option when the optional hard disk or compact flash has been installed.
Proof Print is a feature that allows you to store the print data of multiple copies in the hard
disk or compact flash, print out only the first set to check the print result and if satisfactory,
print the remaining copies from the control panel. You can select these jobs for printing by
entering a PIN at the control panel.
P
RINT AT A SPECIFIED TIME
You can select this option when the optional hard disk or compact flash has been installed.
The delayed print feature allows you to store the data in the printer beforehand and then
print it out automatically at the specified time.
-
TIMED JOB
Printing > 25