Transfer Roll Cartridge; Replacing The Transfer Roll Cartridge; Maintenance Kit - Oki B930dn User Manual

T
RANSFER ROLL CARTRIDGE
The transfer roll cartridge is included as one of the regular replacement parts. When you
are to replace a transfer roll cartridge, open the box of the regular replacement parts and
get the new transfer roll cartridge ready.
When handling a transfer roll cartridge, take note of the following:
> Do not remove and re-insert the transfer roll cartridge in use
> Replace the transfer roll cartridge, when a message to replace it is displayed in the
control panel. If not replaced, the printer will not continue to print.
Never throw a transfer roll cartridge into an open flame. It can
cause an explosion and you can get burned.
R
EPLACING THE TRANSFER ROLL CARTRIDGE
1. Switch off the power of the printer.
2. Open cover A.
3. Pinch the hooks (1 & 2) at each end of the transfer roller (3) and lift to remove it
from chute.
4. Grasp the new transfer roller by the hooks.
5. Insert the new transfer roller into its mounting and reseat the hooks.
6. Close cover A.
7. Turn the printer on.
You can now run sample prints to verify correct operation.
M
AINTENANCE KIT
A maintenance kit is required every 300,000 pages. It consists of:
> Fuser Unit
> Transfer Roller
> Paper Feed Rollers
Contact your service department to install the maintenance kit when the request is
displayed on the Control Panel.
WARNING!
Replacing consumables > 61