11.
Click OK.
12.
Click Print in the Print dialog box to start printing.
P
RINTING ON POSTCARDS
Postcards can be printed using the MPF (Tray 5).
L
OADING AND PRINTING ON POSTCARDS
Before loading the postcards in the tray, consider the following points:
>
Ensure that the postcards are stored in a cool dry place and in their original
packaging. If not heat and humidity can cause the postcards to curl.
>
Load a maximum stack height of 10mm (.4 in), no higher than the fill line.
1.
Insert the postcards in the tray with the following considerations:
>
Insert large postcards long- edge feed and facedown. Place the top of the
postcard to enter the printer first (left side of the printer).
>
Insert small postcards short-edge feed and facedown. Place the top of the
postcard towards the rear of the printer.
Large Postcards
Long-edge Feed
2.
Adjust the paper guides to the size of the postcards.
3.
On the control panel, change the paper type to POSTCARDS.
4.
From the File menu, select Print.
5.
Select this printer as the printer to be used and click Properties.
6.
Click the Media Type drop down box and click on postcards.
7.
Click the Paper Size drop down.
8.
From Paper Size select the size of the original document.
9.
Click OK.
10.
Click Print in the Print dialog box to start printing.
Small Postcards
Short-edge Feed
Printing > 21