Oki B930dn User Manual page 50

SYMPTOM REASON/ACTION
The correct The printer is printing with non-standard built-in fonts. Check the fonts
characters are not used in the application. Download the necessary fonts when using
printed (printing PostScript.
garbage).
The printout is Did you change the TrueType font settings to printer fonts? Change to
different from what TrueType font printing for Font Substitution on the Setup tab of the
is displayed on the printer driver.
screen.
Online Help for the printer driver
The light of the There are jobs remaining in the printer. Cancel printing or force the
<READY> indicator remaining data to be printed.
is on and blinking
To forcibly print the job, press the <ON LINE> button to set the printer
but there is no print
in off-line mode, then press the <FEED/SELECT> button. After the job
output.
has been printed, press the <ON LINE> button again to return the
printer to online mode.
When a parallel/USB port is used, data may be transmitted in the
middle of a job depending on when the <ON LINE> button is pressed.
In this case, subsequent print data received after the <FEED/SELECT>
button is pressed, will be recognized as a new job. The data will be
printed after the off-line mode has been cancelled. Furthermore, it may
not be printed properly.
Cancelling printing:
Printing is very The receive buffer is insufficient. When printing documents of high
slow. resolution, reduce the memory capacity of items not in use.
It is recommended to disable ports not in use, and channel the memory
to other purposes.
Is the printer driver set to 1200dpi on the Graphics tab? Changing
the setting to 600dpi will shorten the print time.
For guidance refer to the online help in the printer driver.
Printing with TrueType fonts may take up printing time. Change the
printing method for TrueType fonts in Specify Font on the Detailed
Settings tab of the printer driver.
For guidance refer to the online help in the printer driver.
Top section of Are the paper tray guides set in the correct positions?
printed document is
Set the length guide and the right width guide in the correct positions.
missing.
See "Loading paper" on page 28.
Text is reduced.
"Cancelling/checking printing" on page 15
Troubleshooting > 50