Displaying Optional Accessory Configuration And Paper Tray Settings - Oki B930dn User Manual

D
ISPLAYING OPTIONAL ACCESSORY CONFIGURATION AND PAPER TRAY SETTINGS
When using this printer as a network printer and with SNMP protocol enabled, you can
display on the printer driver, the optional accessory configuration and settings configured
at the control panel such as paper type or size. These settings are displayed on the Options
tab. This section explains the procedure using Windows XP as an example.
Important:
> When using USB or Parallel connection to this printer, this feature cannot be used.
You have to manually set the items on the printer driver.
> The rear tray information cannot be obtained. You have to manually set the item.
> For paper size and paper type settings, you must configure them at the control panel
beforehand. Even if you change the settings here, they will not be reflected on the
printer itself.
NOTE
> When using this feature, you have to activate the SNMP port (default:
Enable) on the printer using the control panel.
> For Windows 2000/Windows XP/ Windows 2003/Windows Vista, only
users with administrator's rights can change the settings. Users without
administrator's rights can only check the contents.
1. From the Start menu, click Printers and Faxes and then display the properties of
the printer to be used.
2. Click the Device Options tab.
3. Click Get Information from Printer.
NOTE
The properties of the printer can be displayed on the printer driver.
4. Click OK. The contents of the Device Options tab will be updated based on the data
obtained from the printer.
Switching on and off the power > 16