Printing On Custom Size Paper; Loading And Printing On Custom Size Paper - Oki B930dn User Manual

P
RINTING ON CUSTOM SIZE PAPER
This section explains how to print on custom size paper. You can print custom size paper
from Trays 1-5. Tray 6 (HCF) can only print standard paper.
The paper sizes that can be set on this printer are as follows:
INPUT TRAY
TRAY 5
WIDTH 89 - 297mm
(3.5 - 11.70 in)
HEIGHT 98 - 432mm
(3.87 - 17in)
L
OADING AND PRINTING ON CUSTOM SIZE PAPER
When setting the paper size on the printer driver and the control
panel, specify the size of the actual paper used. Setting the wrong
size for printing will cause jam detection. This is especially true if
you configure a bigger size when using a narrow width paper.
1. From the File menu, click Print.
2. Select Properties then select the Setup tab.
3. Select Option as needed: Source, Media Type, etc.
4. You may select a previously stored custom size from the list or you may add an
additional custom size.
5. To add a new custom size:
(a) Select paper feed options.
(b) Select Custom Size.
(c) In the Name Field, Type a name for your custom size.
(d) Click on the Unit of measure radio button for the units you would like to use
(mm for millimetres or inch for inches.)
(e) In the Width field, enter the width of the custom size paper.
(f) In the Length field, enter the length of the custom size paper.
(g) Click add to store the new custom size.
(h) Click OK to close the Dialog Box.
NOTE
> You may use the Modify selection to change a previously stored custom
size.
> You may use the Delete selection to delete a previously stored custom
size.
OUTPUT TRAY
TRAYS 1-4 STANDARD
140 - 297mm 89 - 297mm
(5.5 - 11.70in) (3.5 - 11.70in)
182 - 297mm 98 - 432mm
(7.16 - 11.70in) (3.87- 17.0 in)
CAUTION!
Printing > 23
STACKER STACKER
UPPER LOWER
203 - 297mm 203 - 297mm
(7.9 - 11.70in) (7.9 - 11.70in)
182 - 432mm 182 - 432mm
(7.16 - 17.0 in) (7.16 - 17.0 in)