Table of Contents
Advertisement
Recalling Stored Readings
NOTE: First ensure that the HOLD symbol is not displayed. If it is, exit
the HOLD function by pressing the MODE/HOLD button.
1. Press the CAL/RECALL button and then press the MODE/HOLD
button; the location number (1 through 25) will briefly appear and
then the value stored in that location will appear. The displayed
units will flash, indicating that the storage recall mode is active.
15
2. The last stored reading taken will be displayed first. To advance to
the previously stored readings, press the MODE/HOLD button. The
location number is displayed first, followed by the reading stored in
that location.
3. To exit the storage mode, press the CAL/RECALL button and the
TRACER will return to normal operation after displaying "End".
Clearing the Stored Memory
Turn the TRACER on. Press and hold the ON/OFF button for 4 second
the display will briefly desplay "clr" when the memory is cleared.
t
PP
4.01
H
78.6
11
Advertisement
Table of Contents
