Storing Readings; Recalling Stored Readings; Clearing The Memory - LaMotte PockeTester 1766 User Manual

1.800.561.8187

Storing Readings

1. After the reading is displayed press and hold
the MODE/HOLD button to store the current
reading. The meter will enter the HOLD
mode and HOLD will be displayed. The
storage location number (1 through 25) will be
displayed on the lower display followed by the
reading being stored.
2. Press the MODE/HOLD button to exit the
HOLD mode and return to normal operation.
3. If an attempt is made to store more than 25 readings, the stored
readings will be overwritten starting with the fi rst reading.

Recalling Stored Readings

NOTE: First ensure that the HOLD symbol is not displayed. If it is, exit
the HOLD function by pressing the MODE/HOLD button.
1. Press the CAL/RECALL button and then press the MODE/HOLD
button. The location number (1 through 25) will briefl y appear and
then the value stored in that location will appear. The displayed units
will fl ash, indicating that the storage recall mode is active.
10
2
15
2. The last stored reading taken will be displayed fi rst. To advance to
the previously stored readings, press the MODE/HOLD button. The
location number is displayed fi rst, followed by the reading stored in
that location.
3. To exit the storage mode, press the CAL/RECALL button and the
TRACER will return to normal operation after displaying "End".
Clearing Stored Memory
Turn the TRACER on. Press and hold the ON/OFF button for 4 seconds.
The display will briefl y display "clr" when the memory is cleared.
14 LaMotte TRACER pH/TDS/Salt PockeTester
www.
HOLD
10
20 2 20
μS
1423
L
72.3
°F
1766 Instruction
TM
information@itm.com
.com
10
2 20
μS
1563
L
4