Remove A Speed Dial From A Line Key; Use The Line In Focus For Speed-Dial Calls; Use The Line In Focus To Check Speed-Dial Calls - Cisco 6841 User Manual

Speed Dial
Procedure
Step 1 Press any idle line key on your phone for at least two seconds.
Step 2 In the Speed-Dial window, add the speed-dial name and phone number to call when you press this line key.
Step 3 Click Save.

Remove a Speed Dial from a Line Key

You can press a line key on your phone and delete speed dial assigned to it. The speed dial on the line key is
removed. Check the phone web page to confirm that the speed dial is removed.
Procedure
Step 1 Press a line key that has a speed dial configured for at least two seconds.
Step 2 Press Option > Delete in the Speed-Dial window on the phone screen.

Use the Line in Focus for Speed-Dial Calls

You can configure a line key to perform a speed dial either with a Voice Profile ID (VID) or without a VID.
When both are configured, VID has a higher priority. The call is routed to that line.
If a line key is configured without VID, you can configure a speed-dial key to use the line in focus.
Procedure
Step 1 Configure a speed-dial key without using VID.
Step 2 Change the focus to the line that you prefer.
Step 3 Press the speed-dial key to make a call.
The call is made with the line in focus.
If the existing number of calls on the line in focus is equal to the value set in the Call Appearances Per Line
field in the phone web page, the speed-dial call is made from the next available line.

Use the Line in Focus to Check Speed-Dial Calls

If a line key is configured without VID, you can perform a check to confirm whether the call is made with
the line in focus.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
30
Calls