Printing The Functions Guide; Printing The Logs; Print The List Of Setups; Font Printing - Oki MB290 User Manual

Printing the functions guide

The printing is not possible on A5
Important
(or Statement) paper format.
!51 - PRINT / FUNCTIONS LIST
Press !, enter 51 using the keypad.
The printing of the functions guide starts.
You can also access the PRINT menu
Note
by pressing the

Printing the logs

The printing is not possible on A5
Important
(or Statement) paper format.
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
• date and time of the incoming or outgoing document,
• subscriber's number or E-mail address,
• transmission mode (Normal, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted CORRECT if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
• reason for call error (example: your subscriber does
not answer).
To print the logs:
Press !, enter 54 using the keypad.
The printing of the logs starts. The incoming and outgoing
logs are printed on the same page.
You can also access the PRINT menu
Note
by pressing the

Print the list of setups

The printing is not possible on A5
Important
(or Statement) paper format.
To print the list of setups:
button.
!54 - PRINT / LOGS
button.
!56 - PRINT / SETUP
- 41 -
Press !, enter 56 using the keypad.
The printing of the list of setups starts.
You can also access the PRINT menu
Note
by pressing the

Font printing

The printing is not possible on A5
Important
(or Statement) paper format.
You can print the list of fonts installed on your machine at
any time.
You can also access the PRINT menu
Note
by pressing the
To print PCL fonts:
To print SG Script fonts:
!50 - PRINT / SGScript FONTS

Lock the machine

This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
!811 - ADVANCED FCT / LOCK / LOCKING CODE
1 Press !, enter 811 using the keypad.
2 Enter your lock code (4 digits) with the keyboard,
confirm with OK.
If a code is already registered, enter
Important the old code before typing the new
one.
3 Enter again your lock code (4 digits) with the
keyboard, confirm with OK.
4 Quit this menu by pressing the

Lock the keyboard

Every time you use your machine, you will have to enter
your code.
!812 - ADVANCED FCT / LOCK / LOCK KEYBD.
1 Press !, enter 812 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
4 With the buttons ! or ", choose ON and confirm
with OK.
5 Quit this menu by pressing the
MB290
button.
button.
!59 - PRINT / PCL FONTS
button.
button.