Installing The Drivers Using The Companion; Suite Pro Software - Oki MB290 User Manual

MB290
6 The welcome screen appears. Click on the N
button to launch the installation of the Companion
Suite Pro in your PC.
7 To continue, you need to accept the proposed
license agreement.
8 Click on the N button.
EXT
9 The final installation is ready to be executed. Click
on the I button.
NSTALL
The following screen appears to indicate the
progression of the installation.
10 Click on OK to finish the installation.
Your Companion Suite Pro kit is successfully installed on
EXT
your PC.
Important
You can now connect your multifunction machine.
To connect the multifunction machine to the PC via USB,
refer to paragraph Adding a device connected via USB,
page 68.
To connect the multifunction machine to the PC via the
local network (LAN/WLAN), refer to paragraph Adding a
device connected to the network, page 68.
You can start the multifunction machine's management
software from the menu S
> OKIDATA > C
OMPANION
- D or by clicking on the icon C
IRECTOR
D located on your desktop.
IRECTOR

Installing the drivers using the Companion

Suite Pro software

Turn your PC on. Open an account session with the
administration rights.
1 Open the CD-ROM drive, insert the installation CD-
ROM and close the drive.
2 An installation procedure is automatically run (Auto
run). If it does not, double-click on setup.exe at the
CD-ROM's root.
3 A screen titled C
appears. This screen allows you to install and
uninstall the software, access the product's user
guides or browse the CD-ROM contents.
4 Place your cursor on I
confirm with left-click of the mouse.
5 The Products Installation screen appears.
Place your cursor on C
left-click with the mouse.
6 Place your cursor on C
and confirm with left-click of the mouse.
- 64 -
If you have a firewall installed, you
will be asked whether you want to
authorize the MFServices
application to access the network.
Click Yes or Authorize (depending
on your firewall) to authorize
MFServices.exe to access the
network.
Some firewalls also require port
parametering. Check that ports upd
137 and tcp 26 are open.
Note: Windows XP with Service
Pack 2 and above, and Windows
Vista have a firewall installed by
default.
> A P
TART LL ROGRAMS
S P LL2 > C
UITE RO
OMPANION
S P LL2
OMPANION UITE RO
NSTALL PRODUCTS
and confirm by
USTOMIZED
S
OMPANION UITE
OMPANION
-
and
P LL2
RO