Pc Printing Issues - Oki MB290 User Manual

Oki mb290: user guide

Hide thumbs Also See for MB290:

Quick start manual (2 pages)

Service manual (43 pages)

Table Of Contents

Table of Contents

Code 06 - Printer default

An incident occurred in the printer: no paper, paper jam,

opened cover... In the reception mode, this incident

appears only if the reception parameter is switched to

ITHOUT

APER

Code 07 - Disconnected

The link has been cut (bad line). Check the number and

try again.

Code 08 - Quality

The document you sent was not well received. Contact

your subscriber to see if you need to send again.

Code 0A - No document to be polled

You tried to poll a document from a subscriber who had

not prepared his/her document (no deposit) or the

password entered was incorrect.

Code 0B - Wrong number of pages

There is a difference between the number of pages

indicated during preparation for the transmission and the

number of pages sent. Check the number of pages in the

document.

Code 0C - Received document error

Ask the subscriber who called you to check the length of

his/her document (it may be too long to be completely

received).

Code 0D - Transmission failed

Ask the sender to resend the document.

Code 13 - Memory full

Your fax can no longer receive since its memory is full.

There are too many received unprinted documents or too

many documents in the transmission line.

Print the received documents and delete or transmit

immediately the documents in the transmission line.

Code 14 - Memory full

Received document memory full. Print all received

documents.

Code 15 - Unknown mailbox number

You wish to deposit a document in a subscriber's mailbox.

The mailbox number does not exist.

Code 16 - No Relay Bcst list Nr x

You requested a document relay from a remote fax but

the fax has not programmed the list of subscribers

requested.

Code 17 - Unknown mailbox number

You wish to recover a document from a subscriber's

mailbox. The mailbox number does not exist.

Code 18 - Relay Bcst impossible

You requested a document relay from a remote fax which

does not have the relay broadcast function.

Code 19 - Subscriber has stopped

The communication has been stopped by your

subscriber. (Example: a fax wanted to poll your fax but

there is no document deposited).

Code 1A - Disconnected

The transmission has not started. The telephone line is

busy.

Code 1B - Transmission failed

During transmission: start again.

During reception: ask your subscriber to resend the

document.

Code 50 - Server error

Check the number configured for the SMS server or a

communication error occurred during data transmission.