Table of Contents
Advertisement
MB290
! 2718 - SETUP / LAN ETHER / PARAMETERS /
! 2719 - SETUP / LAN ETHER / PARAMETERS /
1 Enter the IP address of each server, and press OK
to confirm.
If the terminal is set up in Automatic
configuration mode (menu !2711),
these addresses can be filled in
Note
automatically by certain DHCP
servers.
Connection to a domain (for instance with
Windows NT, 2000 or XP)
The machine can identify itself on the local network by
using the parameters of a user account, before it can,
among others, archive documents by means of the Scan
to Disk function.
Once these parameters have been filled in, they will be
used by default, if you do not declare a user name and
password when using the function.
Domain Login user name
! 2721 - SETUP / LAN ETHER / DOM. LOGIN / USER
1 Enter the user name for login on the local network,
then validate with OK.
Domain Login password
! 2722 - SETUP / LAN ETHER / DOM. LOGIN /
1 Enter the password for login on the local network,
then validate with OK.
Domain name
! 2723- SETUP / LAN ETHER / DOM. LOGIN / DOM.
1 Enter the domain name of the local network, then
validate with OK.
SNTP server configuration
The machine can automatically update its date and time
when connecting to an SNTP server.
SNTP server address
! 2731- SETUP / LAN ETHER / SNTP SERVER /
1 Enter the name of the SNTP server, then validate
with OK.
This name can be in the form of an IP address, a DNS
address or a NetBIOS name.
SNTP server port
WINS SRV. 1
! 2732- SETUP / LAN ETHER / SNTP SERVER /
WINS SRV. 2
1 Enter the server port number, then validate
with OK.
The port by default is port 123.
Activating the server access
! 2733- SETUP / LAN ETHER / SNTP SERVER /
1 With ! or ", select ON to activate the SNTP
server then validate with OK.
Time zone
! 2734- SETUP / LAN ETHER / SNTP SERVER / TIME
1 With ! or ", select the time zone where the
terminal is located then validate with OK.
If you have activated the automatic summer time
management, the TIME ZONE setting is initialised
automatically (see Summer time / Winter time setting,
page 33).
Summer time
! 2735- SETUP / LAN ETHER / SNTP SERVER /
1 With ! or ", select the appropriate time setting,
WINTER TIME, SUMMER TIME +1 or SUMMER
TIME +2, then validate with OK.
PASSWORD
Note
NAME
ADDRESS
- 50 -
SUMMER TIME
This menu is not displayed if the menu
AUTO ADJUST is activated (see
Summer time / Winter time setting,
page 33).
PORT
STATE
ZONE
Advertisement
Table of Contents
