Using The Tadiran Exp39 Expansion Module; Using The Line Key - Tadiran Telecom EXP39 User Manual

Using the Tadiran EXP39 Expansion Module

The use of Ext keys on the EXP39 expansion module and DSS keys on the host phone are
almost the same. For more information on using DSS keys on the host phone, refer to the
DSS keys section of Tadiran phone-specific user guide, available online:
http://www.Tadiran.com/DocumentDownload.aspx?CateId=142&flag=142.
This chapter provides you the following operating instructions for the EXP39 expansion
module. Topics include:

Using the Line Key


Adjusting the Contrast

Adjusting the Backlight

Resetting the Tadiran EXP39 Expansion Module

Using the Line Key
You can configure line keys to associate with a line for the connected EXP39 expansion
module. Incoming calls to the line can be distributed evenly among the available line
keys both on the host phone and the connected EXP39 expansion module. Each line key
on the connected EXP39 expansion module can only handle one call. For more
information on configuring an Ext key as the line key, refer to
Bookmark not
You can use a line key to do the following:
Placing a call

Answering a call

Placing an active call on hold

Resuming a held call

To place a call using the line key:
1. Press the line key on the EXP39 expansion module, the host phone will enter the
pre-dialing screen.
2. Enter the desired number using the keypad on the host phone.
3. Press
For more information on placing a call, refer to the Placing Calls section of Tadiran
phone-specific user guide, available online:
http://www.Tadiran.com/DocumentDownload.aspx?CateId=142&flag=142.
defined..
, or the Send soft key on the host phone.
Using the EXP39 Expansion Module
Line on page Error!
7