Cleaning Evacuator Valve; Cleaning Grill, Radiator Screen And Oil Cooler; Checking Brake Pedals And Clutch Pedal; Checking Gauges, Meter And Easy Checker(Tm) - Kubota L2501 Operator's Manual

54 PERIODIC SERVICE
BCleaning Evacuator Valve
Open the evacuator valve to get rid of large particles of
dust and dirt.
(1) Evacuator valve
BCleaning Grill, Radiator Screen and Oil
Cooler
To avoid personal injury or death:
A Be sure to stop the engine before removing the
screen.
1. Check front grill and side screens to be sure they are
clean of debris.
2. Detach the screen with the fixed spring being held up
and remove all foreign materials and clean the front of
radiator completely.
(1) Radiator screen
(2) Fixed spring
(A) "HOLD UP"
(B) "DETACH"
[HST Type]
(1) Oil cooler
A Grill and screen must be clean from debris to prevent
engine from overheating and to allow good air intake
for the air cleaner.
BChecking Brake Pedals and Clutch Pedal
To avoid personal injury or death:
A Be sure brake pedals have equal adjustment
when using locked together. Incorrect or
unequal brake pedal adjustment can cause the
tractor to swerve or roll-over.
1. Inspect the brake and clutch pedals for free travel, and
smooth operation.
2. Adjust if incorrect measurement is found:
(See "Adjusting Clutch Pedal" and "Adjusting Brake
Pedal" in "EVERY 100 HOURS" in "PERIODIC
SERVICE" section.)
BChecking Gauges, Meter and Easy
Checker(TM)
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker(TM) lamps.
2. Replace if broken.
BChecking Head Light, Turn Signal / Hazard
Light etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
BChecking Seat Belt and ROPS
1. Always check condition of seat belt and ROPS
attaching hardware before operating tractor.
2. Replace if damaged.