Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
not to exceed the "
"Log" column pops up a prompt indicating that the writing is successful → click "Save" → see the "Log" column pops
up to save successfully, then complete the configuration → click "reboot device.
(2) Next, you can verify whether the parameters are correct: repeat the "
5.1.4 LoRa configuration parameter range
(1) LoRa channel: 0～83
(2) LoRa address: 0～65535
(3) LoRa airspeed: 2400～625000bps
6 ModBus
6.1 ModBus address table
6.1.1 Function code and register address table
Register address table (function code: 0x03H, 0x06H)
register address
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
LoRa configuration parameters " range
Figure 4-10 LoRa configuration writing
Number
register
of
properties
registers
) → click "Write" in "LoRa Configuration" → see the
LoRa parameter reading steps
register type
register range
K62-DL20 User Manual
" operation steps.
Support function
code
40
Advertisement
Table of Contents
