Ebyte K62-DL20 User Manual page 14

Chengdu Ebyte Electronic Technology Co.,Ltd.
serial
Indicator name
number
1
2
3
4
5
6
7
8
(2) LED light indication on the receiving (restore) end, as shown.
serial
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Flashing for 0.5 seconds: indicates that the product is in normal operation;
RUN After 3 seconds of steady light, recovery will flash for 0.5 seconds: long
press the button for 3 seconds, it means the factory reset is successful.
Steady on: The second communication interface is connected successfully;
NET
Off: The second communication interface is disconnected.
Blinking: Indicates that the product sends out a data signal.
TXD
RXD Blinking: Indicates that the product has received a data signal.
Always on: 0/4～20mA signal input is detected;
AI1
Off: 0/4～20mA signal input is not detected.
Always on: 0/4～20mA signal input is detected;
AI2
Off: 0/4～20mA signal input is not detected.
Always on: 0/4～20mA signal input is detected;
AI3
Off: 0/4～20mA signal input is not detected.
Always on: 0/4～20mA signal input is detected;
AI4
Off: 0/4～20mA signal input is not detected.
Figure 1-6 Indicator light of analog output module
Table 1-6 Function table of analog output module
Indicator name
illustrate
illustrate
K62-DL20 User Manual
13